DS36C278TM/NOPB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The DS36C278TM/NOPB is a high-performance, low-power, CMOS RS-485 transmitter and receiver line driver built with low voltage CMOS technologies. It is specifically designed for industrial applications with high operating temperature ranges and stringent electrical requirements. The device meets the requirements of EIA Standard RS-485 and is engineered to reduce Electromagnetic Interference (EMI) and minimize differential voltage losses.

The DS36C278TM/NOPB is typically used in communications systems that rely on multi-master serial data transmissions. It performs full duplex operations, meaning it can simultaneously send and receive data. It is designed for both half-duplex and full-duplex communication, with up to 32 receivers and 32 drivers connected through the two twisted wires. It features automatic send/receive control and provides a directional control output for powering other transceivers that can be enabled via a logic level control.

The DS36C278TM/NOPB has many features to support the user’s application, such as low power consumption, integrated pullup/pulldown termination resistors, slew rates, hysteresis and large resistance range for data inputs and outputs. The device is ideal for applications that require high bandwidth, noise immunity and low power consumption such as industrial control, control systems, process control, communication control and many other applications.

In order to use the DS36C278TM/NOPB properly, one must understand the operation and principle of the device. It consists of two independent channels, one between the transmitter and receiver and the other between the driver and receiver. Each channel is composed of a differential line driver and a differential line receiver, separated by a high speed diode. The integrated high speed diode helps to limit the amount of transients or "ring-waves" transmitted on the line in case of electric shock. The receiver is used to convert the electrical signal back into digital form for processing by the baseboard\'s logic circuit.

When transmitting data, the RS-485 driver converts the data from the logic circuit into an electrical signal that is then sent onto the receiver. The data is then transmitted onto the receiver and finally received by the transmitter. When receiving data, the data is transmitted onto the receiver and then converted back into digital form by the logic circuit. The device also has an integrated receiver, which monitors the line for incoming messages and can also detect errors in the communication. The driver and receiver can be configured through registers, which control the data rate, transmit threshold, receive threshold and many other parameters.

The DS36C278TM/NOPB also has a built-in capability to detect and output low-level signals sent on the transmission line, allowing it to detect low-power devices connected to the power line. It also provides a wide variety of protection features, such as over-temperature protection, surge protection, and ESD protection, to ensure that the device works reliably in harsh environment.

In conclusion, the DS36C278TM/NOPB is a highly versatile and reliable device, designed for both simple and complex multi-master applications. It features low power consumption, integrated pullup/pulldown termination resistors, slew rates, hysteresis and a variety of features that enable it to meet the requirements of industrial applications. It is also very easy to use, with integrated driver and receiver channels and register configurability.

The specific data is subject to PDF, and the above content is for reference