DZ2S300M0L

The DZ2S300M0L is a type of diode that belongs to the Single Zener diode category. It is a low power Zener diode designed to provide a regulated voltage source when connected to an AC or DC power source. With a maximum power rating of 300mW, this diode is commonly used in a wide array of applications such as voltage regulation, overvoltage protection, waveform clipping and waveform shaping.

The diode is designed to provide a regulated voltage output when connected to an AC or DC supply. This is achieved by employing a reverse breakdown mechanism. When an external current flows through the diode, the electric field in the junction of the device increases up to a certain voltage level and results in a reverse breakdown of the junction. This breakdown happens when the forward voltage at the junction drops below the specified breakdown voltage and the current changes from a DC state to an AC state.

The breakdown voltage of the DZ2S300M0L is specified at 3.0V and its peak reverse voltage (VRM) is 30V. The dynamic impedance of the diode is specified at 7.2 ohms. The device also features low leakage current with a maximum of 190nA @ 5.0V. The device has a junction temperature range of -55C to 150C.

The DZ2S300M0L is mainly used for voltage regulation and overvoltage protection in a wide variety of applications. It can be used to regulate the output voltage of a power source, such as a linear regulator, power supply, transformer, or switching regulator. It can also be used to limit voltage transients in digital circuits, providing protection against transient voltages that could damage the device. The diode can also be used to clip waveforms, such as a ramp or sawtooth waveform, and to shape waveforms, such as a sine wave.

The DZ2S300M0L is a low power Zener diode which is used for voltage regulation and overvoltage protection in a variety of applications. It features a specified breakdown voltage of 3.0V, a VRM of 30V and a dynamic impedance of 7.2 ohms. The device is able to regulate an AC or DC power source and features low leakage current. It is commonly used for applications such as voltage regulation, overvoltage protection, waveform clipping and waveform shaping.