E36D630HPN153MA79M

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are capacitors whose plates are separated by an electrolytic material and are stored in an aluminum case. The E36D630HPN153MA79M is one such product.

Aluminum electrolytic capacitors are widely used in a variety of industrial and consumer applications. Due to their high capacitance, low impedance, and low cost, they are often used in a variety of applications such as power supplies, motor drives, and energy management systems. Capacitance values range from a few nanofarads to many microfarads. They are ideal for filtering and bypassing applications and high-voltage power factor correction.

The E36D630HPN153MA79M aluminum electrolytic capacitor is a bipolar type with a rated voltage of 630 volts and a capacitance of 153 microfarads. It features a ripple current of 79mA at 20°C and 105°C as well as a low equivalent series resistance of 0.16 ohms at 1 kHz. The capacitor is rated to operate at a temperature range of -55°C to +105°C under low humidity conditions.

The working principle of the E36D630HPN153MA79M is that when a voltage is applied across the two plates, charges of opposite polarity accumulate on the two plates. This creates an electric field between the two plates. The electric field will then store the energy, much like a battery, with the capacitance being determined by the size of the plates. As the stored energy increases, the capacitance increases. By controlling the voltage applied to the capacitor, one can control the capacitance and output current.

The E36D630HPN153MA79M capacitor is most commonly used in audio systems; high frequency and power amplifiers; reciprocating and continuous duty power supplies; and electric motors. It is also used in AC ripple suppressors, power factor correction circuits, high voltage rectifiers, and switched-mode power supplies.

In summary, the E36D630HPN153MA79M capacitor is an aluminum electrolytic capacitor with a capacitance of 153 microfarads, ripple current of 79mA at 20°C and 105°C, and low equivalent series resistance of 0.16 ohms at 1 kHz. It is often used in a variety of applications where high capacitance and low impedance are required.

The specific data is subject to PDF, and the above content is for reference