E82D800VGS103MA80T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors are the most widely used type of capacitor due to their relatively low cost and wide variety of applications. The E82D800VGS103MA80T is an example of such a capacitor. This capacitor is an Aluminum Electrolytic Capacitor with an 8-volt rated voltage, a 1000 microfarad capacity, and a rated temperature of 105 degrees Celsius.

The main application field of this E82D800VGS103MA80T capacitor is its use in power electronics such as switch mode power supplies and DC-DC regulators. The high voltage rating ensures that these capacitors can handle voltage spikes present in these applications. Additionally, the high capacitance also allows for better power regulation when compared to smaller capacitors.

The working principle behind this capacitor is that it uses a dielectric in order to store energy. The dielectric is usually an electrolyte such as a solution of sulfuric acid, potassium hydroxide, or other acid-base solutions. This dielectric is then sandwiched between two layers of aluminum foil which act as conductors. When a voltage is applied across the capacitor, the aluminum foil layers act as plates, and the dielectric acts as an insulator. This creates an electric field between the two plates which stores energy.

When the capacitor is discharged, the electric field between the two plates is reversed, which causes the current to flow in the opposite direction. This current is then used to power the device or circuit that is connected to the capacitor. The amount of energy that can be stored in the capacitor depends on the capacitance, which is measured in microfarads.

In conclusion, the E82D800VGS103MA80T capacitor is an Aluminum Electrolytic Capacitor with an 8-volt rated voltage, a 1000 microfarad capacity, and a rated temperature of 105 degrees Celsius. This capacitor is typically used in power electronics such as switch mode power supplies and DC-DC regulators. Its working principle is based on the use of a dielectric such as an electrolyte solution sandwiched between two layers of aluminum foil which act as conductors, and an electric field which stores energy. When this capacitor is discharged, the electric field between the two plates is reversed and the current used to power the device or circuit to which it is connected.

The specific data is subject to PDF, and the above content is for reference