| Allicdata Part #: | E8AA-M05-ND |
| Manufacturer Part#: |
E8AA-M05 |
| Price: | $ 0.00 |
| Product Category: | Sensors, Transducers |
| Manufacturer: | Omron Automation and Safety |
| Short Description: | SENSR PRESSUR 0-500KPA .004-.02A |
| More Detail: | Pressure Sensor 72.52 PSI (500 kPa) Vented Gauge M... |
| DataSheet: |  E8AA-M05 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Series: | -- |
| Part Status: | Obsolete |
| Pressure Type: | Vented Gauge |
| Operating Pressure: | 72.52 PSI (500 kPa) |
| Output Type: | Wheatstone Bridge |
| Output: | 4 mA ~ 20 mA |
| Accuracy: | ±1% |
| Voltage - Supply: | 12 V ~ 24 V |
| Port Size: | Male - 1/4" (6.35mm) Tube |
| Port Style: | Threaded |
| Features: | -- |
| Termination Style: | Cable |
| Maximum Pressure: | 142.14 PSI (980 kPa) |
| Operating Temperature: | -10°C ~ 60°C |
| Package / Case: | Cylinder, Threaded |
| Supplier Device Package: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
E8AA-M05 pressure sensors, also known as transducers, are electronic components used to measure the amount of pressure in liquids or gases. The E8AA-M05 is a type of transducer that uses a piezoelectric measurement element to accurately measure the pressure. The pressure range is from 0.5 to 10 MPa (50 to 100 bar). This type of transducer is usually used in industrial applications such as hydraulic and pneumatic pressure monitoring.
In a typical E8AA-M05 application, the pressure in the system is measured by a sensing element. The sensing element is connected to the pressure transducer, which converts the pressure into an electrical signal. The electrical signal is then amplified and sent to an analog-to-digital converter (ADC). The ADC converts the signal into a digital value that can then be read by a computer or other device. In some applications, the device may be programmed to provide a digital output that can be used for controlling the system.
The working principle of an E8AA-M05 pressure transducer is based on the piezoelectric effect. When a piezoelectric material is placed under pressure, it will generate an electrical charge. This charge is then sent to the transducer, which amplifies the signal and sends it to the ADC. The ADC then converts the signal into a digital value that can be read by the system or device.
The E8AA-M05 pressure transducer is a reliable and accurate device, and is commonly used in a variety of industrial applications. It is also highly versatile, and can be used in both low and high pressure applications. The device is also capable of providing real-time pressure readings. This makes it ideal for applications such as preventive maintenance, leak detection, and safety monitoring.
In conclusion, the E8AA-M05 pressure sensor is a reliable and accurate device, and is suitable for a variety of industrial applications. It is relatively easy to install and use, and is capable of providing real-time pressure readings. With its versatile design and wide range of applications, the E8AA-M05 is an ideal choice for pressure transducer applications.
The specific data is subject to PDF, and the above content is for reference
SST PRESSURE TRANSDUCERPressure Sensor
PRSSR TRNS 0-100BR 4-20MA DINPressure Se...
BRD MNT PRESSURE SENSORSPressure Sensor ...
BRD MNT PRESSURE SENSORSPressure Sensor ...
HEAVY DUTY PRESSURE TRANSDUCERPressure S...
BRD MNT PRESSURE SENSORSPressure Sensor ...