Allicdata Part #: | E8AA-M10-ND |
Manufacturer Part#: |
E8AA-M10 |
Price: | $ 0.00 |
Product Category: | Sensors, Transducers |
Manufacturer: | Omron Automation and Safety |
Short Description: | SENSOR PRESSURE 0-1MPA .004-.02A |
More Detail: | Pressure Sensor 145.04 PSI (1000 kPa) Vented Gauge... |
DataSheet: | E8AA-M10 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Part Status: | Obsolete |
Pressure Type: | Vented Gauge |
Operating Pressure: | 145.04 PSI (1000 kPa) |
Output Type: | Wheatstone Bridge |
Output: | 4 mA ~ 20 mA |
Accuracy: | ±1% |
Voltage - Supply: | 12 V ~ 24 V |
Port Size: | Male - 1/4" (6.35mm) Tube |
Port Style: | Threaded |
Features: | -- |
Termination Style: | Cable |
Maximum Pressure: | 290.08 PSI (2000 kPa) |
Operating Temperature: | -10°C ~ 60°C |
Package / Case: | Cylinder, Threaded |
Supplier Device Package: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Pressure sensors are widely used in many applications, from automotive to industrial applications. The E8AA-M10 is a pressure transducer designed for use in industrial and commercial applications. It is designed for reliable and accurate measurements of pressure, allowing it to be used in a variety of applications.
The E8AA-M10 is a microprocessor-based, low-cost pressure transducer. It is capable of measuring pressure up to 100 bars and is designed to operate over a wide temperature range. It has a wide range of measurement inputs including linear, differential, absolute and gauge pressure. The transducer also has an adjustable dead zone, which can be adjusted to allow for the most accurate readings. It is powered by either 5V or 10V and is compatible with most analog and digital signal conditions.
The working principle of the E8AA-M10 is based on the principle of sensing pressure. When the pressure is applied to the diaphragm of the transducer, the displacement of the strain gauge is measured by the internal micro-controller. The pressure is then converted into an electrical signal which can be read and recorded by the display. The internal micro-controller also controls the accuracy of the measurement. The transducer is also adjustable to allow for different sensitivities and accuracy.
The E8AA-M10 is capable of accurate measurements, allowing it to be used in a wide range of applications. It can be used for measuring and monitoring various pressures, such as water pressure, air pressure, pressure of gases, and even vacuum. It is also suitable for controlling and monitoring the pressure of hydraulic and pneumatic systems. Additionally, the E8AA-M10 can be used for calibration of pressure gauges. The transducer also has a wide range of applications in chemical, automotive and medical industries.
The E8AA-M10 is a reliable and accurate pressure transducer. It is designed to provide accurate measurements over a wide temperature range and to operate in different environments. It can be used in a variety of applications, from automotive to industrial. It is designed to be a cost-effective and reliable solution for pressure monitoring and control.
The specific data is subject to PDF, and the above content is for reference
SST PRESSURE TRANSDUCERPressure Sensor
PRSSR TRNS 0-100BR 4-20MA DINPressure Se...
BRD MNT PRESSURE SENSORSPressure Sensor ...
BRD MNT PRESSURE SENSORSPressure Sensor ...
HEAVY DUTY PRESSURE TRANSDUCERPressure S...
BRD MNT PRESSURE SENSORSPressure Sensor ...