EDH476M010A9DAA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are one of the most common types of capacitors used in a wide range of applications, due to their ability to be designed for a variety of voltage and capacitance values. EDH476M010A9DAA is one such example. This particular type of aluminum electrolytic capacitor has a capacitance of 476μF, and a voltage rating of 10V.

The primary application for EDH476M010A9DAA capacitors is in switch-mode power supplies. These devices are used to step down AC voltage before it is supplied to the load. EDH476M010A9DAA capacitors can also be found in other power supply circuits, including voltage regulators, DC-DC converters, and converters for motor drives. The capacitors may also be used in filtering applications to reduce ripple voltages.

The working principle of an EDH476M010A9DAA capacitor is similar to that of any other aluminum electrolytic capacitor. It consists of two conductor plates that are submerged in an electrolyte solution, enveloped by an aluminum oxide layer which serves as the dielectric. The dielectric\'s properties determine the capacitance of the device. When a voltage is applied across the devices terminals, the conductor plates draw a charge from the electrolyte, which is then stored in the capacitor. The amount of charge stored in the capacitor is dependent on the capacitance of the device.

EDH476M010A9DAA capacitors are typically rated for temperatures ranging from -25°C to 85°C. Their most common form factor is the polarized axial form, though they are available in a variety of other form factors as well, including radial and snap-in. These capacitors are designed for use in applications where a low ESR (Equivalent Series Resistance) and high ripple current is required. They are available with both leaded and surface mount terminations.

To summarize, EDH476M010A9DAA aluminum electrolytic capacitors are used in a variety of applications, ranging from power supply circuits to filtering applications. They have a capacitance of 476μF and a voltage rating of 10V. Their working principle is similar to that of any other aluminum electrolytic capacitor, and they are available in a variety of form factors with both leaded and surface mount terminations. Their most common application is in switch-mode power supplies, but they may also be used in voltage regulators, DC-DC converters and motor drives.

The specific data is subject to PDF, and the above content is for reference