EEV107M050A9MAA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are one of the most commonly used electronic components in electronic circuits. They are mainly used in AC and DC power supplies, DC-DC converters, and batteries. EEV107M050A9MAA is an aluminum electrolytic capacitor with a rated voltage of 100 volts and a capacity of 10,000 uF. In this article, we will discuss the application field and working principle of the EEV107M050A9MAA.

Application Field

The EEV107M050A9MAA is a capacitor of the aluminum electrolytic type, it is mainly used for two purposes, as a smoothing capacitor for a dc power supply or as a filter capacitor for an AC power supply. In its most common application, the EEV107M050A9MAA is used as a storage element in a switched-mode power supply (SMPS). The capacitor is connected between the switching transistor and the output of the power supply. This ensures that the current is not disturbed when the switch is turned off. The capacitor also helps to keep the voltage across the switching transistor constant, allowing it to be switched on and off faster.

The EEV107M050A9MAA can also be used as a filter capacitor. In this role, it is connected between the power line and ground, and helps to keep the voltage from fluctuating too much. The capacitor stores the excess electricity, and releases it back into the power line when needed. This helps keep the power supply steady, and reduces noise and interference.

In addition to its standard applications, the EEV107M050A9MAA can be used for other purposes. It can be used to reduce ripple noise in switched-mode power supplies, as a bypass capacitor for radio frequency interference, and as a smoothing capacitor for a DC power supply.

Working Principle

The EEV107M050A9MAA is a type of aluminum electrolytic capacitor. This means that it uses an electrolyte composed of a solution of anions, cations, and water, to store electrical energy. The capacitor’s two electrodes are typically made of aluminum and are separated by a layer of insulating material. One electrode is connected to the ground, while the other is connected to the power line or switching transistor.

When current flows across the capacitor, it will cause a voltage potential to exist between the two electrodes. This builds up electrical energy that is stored in the capacitor. When the current is removed, the capacitor will discharge the stored energy back into the circuit.

The EEV107M050A9MAA capacitor has a rated voltage of 100 volts, which means that it can store a certain amount of energy before it needs to be replaced. The energy stored by the capacitor is directly proportional to its voltage rating, meaning that a capacitor with a higher rating will store more energy than one with a lower rating.

Like all capacitors, the EEV107M050A9MAA has an inductive property. This means that when it is placed in a circuit, it will cause a resistance to the flow of current. This resistance is known as capacitive reactance, and is measured in ohms. The higher the capacitance of the capacitor, the higher the capacitive reactance will be.

As the capacitor is exposed to high temperatures, the electrolyte will evaporate, reducing its performance. When this happens, the capacitor needs to be replaced in order to maintain the desired performance. In order to avoid this issue, it is important to use a capacitor with a higher voltage rating than is necessary, as this will prevent the capacitor from overheating.

Conclusion

The EEV107M050A9MAA is an aluminum electrolytic capacitor with a rated voltage of 100 volts and a capacity of 10,000 uF. It is most commonly used as a storage element in a switched-mode power supply, a filter capacitor in an AC power supply, and a smoothing capacitor in a DC power supply. It works by storing electrical energy in the form of voltage between its two electrodes, which are separated by a layer of insulating material. It also has an inductive property, in which it causes a resistance to the flow of current. This resistance is known as capacitive reactance, and increases with the capacitor’s capacitance. The capacitor can be damaged by exposure to high temperatures, so it is important to use one with a higher voltage rating than is necessary in order to avoid this issue.

The specific data is subject to PDF, and the above content is for reference