EKMG500ETD100ME11D

Polarization:	Polar
Package / Case:	Radial, Can
Mounting Type:	Through Hole
Surface Mount Land Size:	--
Height - Seated (Max):	0.492" (12.50mm)
Size / Dimension:	0.197" Dia (5.00mm)
Lead Spacing:	0.079" (2.00mm)
Ripple Current @ High Frequency:	72mA @ 100kHz
Ripple Current @ Low Frequency:	40mA @ 120Hz
Applications:	General Purpose
Ratings:	--
Series:	KMG
Operating Temperature:	-55°C ~ 105°C
Lifetime @ Temp.:	1000 Hrs @ 105°C
ESR (Equivalent Series Resistance):	--
Voltage - Rated:	50V
Tolerance:	±20%
Capacitance:	10µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Tape & Box (TB)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors

Aluminum electrolytic capacitors are a type of capacitor that can store a large amount of electric energy. They are commonly used in electronic circuits and are used in many everyday electronic gadgets such as phones and televisions. The most common type of electrolytic capacitor is the EKMG500ETD100ME11D. Here, we will discuss the application field and working principle of these capacitors.

Application Field of EKMG500ETD100ME11D

EKMG500ETD100ME11D is a type of aluminum electrolytic capacitor that is often used in frequency-dependent applications. It has a wide frequency response range and is well suited for use in audio amplifiers, attenuators, and amplifiers in general. It can also be used in crossover networks that deal with low frequency signals and audio power amplifiers.

Working Principle of EKMG500ETD100ME11D

The working principle of the aluminum electrolytic capacitor is relatively simple. It consists of two layers of aluminum foil that are separated by a non-conducting paper called the dielectric. The dielectric is impregnated with electrolyte and sealed into an aluminum can. When voltage is applied, an electric current flows between the two layers of foil, charging the capacitor. This electric current creates the charge on the capacitor, which is responsible for its capacity. As the charge on the capacitor increases, the capacitance of the capsule also increases. The capacitance is the measure of how much charge can be stored on the capacitor. In order to discharge the capacitor, the applied voltage is removed and the current flow stops, allowing the capacitor to discharge its stored charge. As the capacitor is being discharged, the capacitor’s capacitance decreases, as the capacity of the capacitor is reduced. In addition to being used in audio amplifiers and attenuators, the aluminum electrolytic capacitor is also used in radio receivers, oscillators, and power supplies. It is also used as a filter to block out unwanted noise in radio and television signals.

Conclusion

The EKMG500ETD100ME11D is a type of aluminum electrolytic capacitor that is commonly used in audio and frequency-dependent applications. It is made up of two layers of aluminum foil separated by a dielectric that is impregnated with electrolyte and sealed into an aluminum can. When voltage is applied to the capacitor, it charges up and stores electric energy, and when voltage is removed, it discharges the stored charge. In addition to being used in audio applications, it is also used in radio receivers, oscillators, and power supplies, as well as for filtering out unwanted noise in radio and television signals.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description