EKXJ501ELL100MJ30S

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors, such as the EKXJ 501ELL 100MJ30S, are a type of capacitors that use aluminum foil coated with an oxide layer as one of the plates and a moist, porous separator as the second plate. As current is applied, ions are exchanged between the two conductors and a charge will be stored by the capacitor. This type of capacitor has higher electrical capacity than many other types and is generally used for power supply filtering, bypassing, and signal coupling when large currents with high stability are needed.

The EKXJ 501ELL 100MJ30S Aluminum Electrolytic capacitor is a radial lead version featuring a low-ESR, with long lifetime and high capacitance. Its rated voltage is 6.3 V - 16 VDC and its operating temperature range is -55°C to +85°C. Its lead spacing is 5mm, size is 6.3 × 11 mm, and its rated capacitance of 100µF. It also has an impedance of 30mΩ. It is a polarized component, so the orientation of the positive and negative leads must be followed.

The capacitance of the EKXJ 501ELL 100MJ30S is derived from the combination of its materials, including aluminum foil and a special internal electrolyte that allows ions to pass through. This makes it a high-dielectric strength capacitor, meaning it is capable of handling large amounts of power.

As an electrolytic capacitor, the EKXJ 501ELL 100MJ30S is used in applications where high current levels and high capacitance is required. This includes applications such as power filtering, decoupling, and signal bypassing in power supplies, motor poles, and RF circuits. As a general purpose component, it can also be used for other purposes, such as for timing, snubbing, and energy storage.

The working principle of the EKXJ 501ELL 100MJ30S is based on Faraday\'s Law, which states that a voltage is produced when two conductors are placed in a changing magnetic field. When current is applied to the capacitor, the electric potential causes ions to pass between the two plates, creating a charge. This charge builds up until the resistance of the electrolyte equals the resistance of the capacitor, and the capacitance is reached.

An aluminum electrolytic capacitor like the EKXJ 501ELL 100MJ30S is a specialized type of capacitor that specializes in high current levels and high capacitances. Its use is mainly for applications such as power filtering, decoupling, and signal bypassing, as well as for general purpose applications such as timing and snubbing. Its working principle is based on Faraday\'s Law, and relies on the passing of ions through its porous separator to create a charge.

The specific data is subject to PDF, and the above content is for reference