EKZN160ELL182MJ25S

Aluminum Electrolytic Capacitors

Aluminum Electrolytic Capacitors (AEC) are an essential part of almost any electronic device. AECs are non-polarized capacitors made from aluminum electrolyte with either an anode or a cathode. They are mainly used in applications that require both power and high-speed response. AECs have been used in a wide range of applications including high-frequency radio, power supplies and medical equipment, telecommunication systems, consumer electronics, and embedded systems.

EKZN160ELL182MJ25S – Application Field and Working Principle

EKZN160ELL182MJ25S is a type of Aluminum Electrolytic Capacitors specifically designed to meet high frequency switching power supply applications. It has very low ESR and is suited for high frequency and high current applications where ripple current is high.

Features of EKZN160ELL182MJ25S includes its low ESR, low impedance, high ripple current and high load life capability. This capacitor is mainly used for DC-DC converter, switch mode power supplies and lights control circuits.

The working principle of the EKZN160ELL182MJ25S capacitor is based on Faraday\'s law, which states that the rate of change of voltage over time is equal to the rate of change of charge. This capacitor contains an electrolyte electrolyte with a double layer of aluminum foil between the cathode and anode layers. The electrolyte barrier separates the anode and cathode layers, providing electrical insulation.

The EKZN160ELL182MJ25S capacitor consists of two electrodes separated by an anode and a cathode. It works on the principle of Faraday’s law. As the capacitor is charged and discharged, electric charge is stored and released between the two electrodes. The rate at which the capacitor charges and discharges is determined by the capacitance, which is the measure of the capacity of the capacitor to store the charge.

In conclusion, EKZN160ELL182MJ25S is an aluminum electrolytic capacitor with features such as low ESR, low impedance, and high load life capability, which makes it an ideal choice for applications such as DC-DC converters, switch mode power supplies, and lights control circuits. It works on the principle of Faraday’s law, where the rate of charge change is determined by the capacitance.