EL3011M

Current - On State (It (RMS)) (Max):	100mA
Approvals:	CSA, DEMKO, FIMKO, NEMKO, SEMKO, UL
Supplier Device Package:	6-DIP
Package / Case:	6-DIP (0.400", 10.16mm)
Mounting Type:	Through Hole
Operating Temperature:	-55°C ~ 100°C
Current - DC Forward (If) (Max):	60mA
Voltage - Forward (Vf) (Typ):	1.18V
Turn On Time:	--
Current - Hold (Ih):	250µA (Typ)
Series:	--
Current - LED Trigger (Ift) (Max):	10mA
Static dV/dt (Min):	100V/µs (Typ)
Voltage - Off State:	250V
Voltage - Isolation:	5000Vrms
Number of Channels:	1
Zero Crossing Circuit:	No
Output Type:	Triac
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

EL3011M Optoisolators - Triac, SCR OutputOptoisolators are electronic devices that use light to electrically isolate two circuits. They play an important role in many applications, including surge protection and as a means to test or control AC or DC power voltages. One type of optoisolator is the EL3011M, which is an optocoupler with a triac and an SCR output.The EL3011M is used in a wide range of applications, most commonly for controlling and switching electrical power. It is designed with two terminals for triggering and two for the load circuit. The device works by converting input signals from the triggering circuit into electrical isolation that then triggers the triac, which in turn switches on the SCR output.The EL3011M works by first receiving the input signal from the triggering circuit, which it then converts into an isolated electrical signal. In this case, the isolated signal is known as an optically isolated signal. This signal is used to control the SCR output and turn it on or off.The optoisolator has two different triggering mechanisms depending on the input signal. If the input signal is AC, then the triggering is done through the application of a current to the triggering terminals. If the input signal is DC, then the triggering is done through the application of a voltage to the triggering terminals. In both cases, the optoisolator converts the input signal into an optically isolated output that then turns on the SCR output.The EL3011M uses a series gate to convert the input signal into a low level voltage suitable for triggering the triac and SCR output. This series gate eliminates any signal distortion due to the transfer function of the optocoupler and its impedance at the operating frequency. The output of the device is a modulating 50 Hz / 60 Hz AC, which can be used for switching applications or to simulate mechanical switching.The EL3011M is rated for a maximum load current of 800 mA, and a maximum power dissipation of 3000 mW. It’s operating temperature range is -50°C to +85°C, and it has an isolation voltage level of >3kV. It can be used in a variety of applications, including AC motor control, lighting control, temperature control, and a variety of industrial applications.In summary, the EL3011M optoisolator is an excellent choice for AC and DC power control applications, due to its high isolation level and low dissipation loss. It offers a reliable way to isolate two circuits, while providing an isolated output signal that can be used to trigger a triac or SCR. Furthermore, it is a low power device that is easy to use, with a wide operating temperature range and a maximum load current of 800 mA.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description