EL3063S(TA)-V

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators - Triac, SCR Output are a type of electrical device used to protect a circuit from abnormally high voltage or current. They isolate one electric circuit from another while allowing their respective signals to pass through. One of the widely used optoisolators in the market today is the EL3063S(TA)-V optoisolator. This device is characterized by its high voltage ratings and low noise performance. It also has superior optical and electrical isolation properties, making it ideal for a wide range of applications, from industrial and automotive to medical and consumer electronics.

The EL3063S(TA)-V optoisolator has a solid state phototriac output and is mounted in a four-pin DIP package. This optoisolator has two separate input terminals: a control input terminal (C in) and an output terminal (O in). The C in terminal is designed to be connected to an external logic device or control circuit, while the O in terminal is connected to the load that needs to be controlled. When the control voltage is applied across the C in terminal, a current proportional to the control voltage flows through the optoisolator, creating an optical pulse that is modulated by the control voltage. This optical pulse is then transmitted across the optoisolator to an output terminal, resulting in the desired output.

The optoisolator’s output type determines how the output is affected by the input control voltage. This optoisolator is equipped with a logic-level Triac output, which means that the output is “on” when the C in terminal voltage is above a certain threshold value, and “off” when the voltage is below the threshold. Thus, the Triac output turns the load on and off in proportion to the applied control voltage. The optoisolator can also be configured with an SCR (silicon controlled rectifier) output, in which the output is switched on and off by a positive-going trigger pulse. The EL3063S(TA)-V optoisolator also provides a high level of insulation between the input and output circuits, thus ensuring that no unwanted leakage currents can pass through the optoisolator.

Lesite’s EL3063S(TA)-V optoisolator is ideal for controlling loads up to 250V and 30A. It can be used in a variety of applications, such as light dimmers, motor controls, heating controls, and other power control applications. The optoisolator is highly resistant to electrical interference and has a wide operating temperature range of -40° to +125°C, making it suitable for use in harsh industrial environments. This device also comes with several safety features to ensure reliable operation.

In short, Lesite’s EL3063S(TA)-V optoisolator is a reliable and robust device that can be used in a wide variety of applications. It has excellent electrical, optical, and insulation properties, and is highly tolerant to electrical and environmental disturbances. With its many safety features and rugged construction, this optoisolator is an ideal choice for controlling loads in commercial and industrial applications.

The specific data is subject to PDF, and the above content is for reference