EL3051S(TB)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are electrical components which are designed to isolate two circuits from each other. Optoisolators typically use light waves to transfer signals from one circuit to another without direct electrical connection. The EL3051S(TB) is a specialized type of optoisolator containing Triac, SCR Output. It is used to completely isolate one circuit from another circuit, while allowing electrical signals to be transferred between them.

EL3051S(TB) is designed for high efficiency and protection against RF and EMC interference. It features an optimized dielectric strength of 5.7kV for reliable operation. Additionally, the device is equipped with a low-level noise suppression and low-frequency noise reduction, and an over-current short-circuit protection.

The working principle of EL3051S(TB) involves the transfer of input signal from an optically isolated TRIAC output interface with galvanic isolation. The device consists of three main components, an optical isolator, a shielded transformer, and a photocoupler. The optical isolator receives the input signal and then couples it to the TRIAC circuit. The TRIAC circuit then amplifies the signal and outputs it to the shielded transformer. The transformer, in turn, isolates the signal from any external electrical noise, providing additional protection against EMI. Finally, the photocoupler then converts the isolated signal back into the input signal, providing a complete isolation between the two circuits.

EL3051S(TB) is widely used in a variety of applications, such as motor control, AC switching, lighting control, resistive heating, and more. In motor control, the optoisolator allows for the transfer of a low-voltage control signal to a power circuit. Similarly, in AC switching, EL3051S(TB) enables the transfer of a signal from an external device to the power circuit. Lighting applications can use the optoisolator to control LED indicators, while resistive heating applications can leverage them to control heaters and resisters.

In conclusion, EL3051S(TB) is a specialized optoisolator designed for use in TRIAC, SCR Output. It features an optimized dielectric strength, low-level noise suppression, over-current short-circuit protection and other features. It is widely used in motor control, AC switching, lighting control, resistive heating, and more.

The specific data is subject to PDF, and the above content is for reference