EMLA500ADA221MJA0G

Series:	Alchip™- MLA
Packaging:	Tape & Reel (TR)
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Capacitance:	220µF
Tolerance:	±20%
Voltage - Rated:	50V
ESR (Equivalent Series Resistance):	--
Lifetime @ Temp.:	3000 Hrs @ 105°C
Operating Temperature:	-40°C ~ 105°C
Polarization:	Polar
Ratings:	--
Applications:	General Purpose
Ripple Current @ Low Frequency:	335mA @ 120Hz
Ripple Current @ High Frequency:	670mA @ 100kHz
Impedance:	180 mOhms
Lead Spacing:	--
Size / Dimension:	0.394" Dia (10.00mm)
Height - Seated (Max):	0.406" (10.30mm)
Surface Mount Land Size:	0.406" L x 0.406" W (10.30mm x 10.30mm)
Mounting Type:	Surface Mount
Package / Case:	Radial, Can - SMD

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are an essential component in any electronic system. Their high capacitance/volume ratio, low leakage, high reliability, and cost effectiveness make them ideal for a variety of applications, including power supplies, power switching, audio systems, digital correction, and general power circuits. The EMLA500ADA221MJA0G is an aluminum electrolytic capacitor, made from two kinds of capacitors, an anodic and a cathodic.The anode of the EMLA500ADA221MJA0G is made of aluminum foil with a thin oxide film of approximately 5μm on its surface. This oxide film provides insulation between the anode and cathode, allowing the capacitors to store electrical charge. The anode also has a layer of electrolyte, which provides adhesive to keep the oxide layer in place and also acts as an electrolyte to conduct electrical current. The cathode is usually made of a metal sheet, with a layer of electrolyte on its surface. This layer of electrolyte provides a barrier between the anode and the cathode, preventing leakage of electrical charge between the two parts.The EMLA500ADA221MJA0G has a capacitance of 220μF, an operating temperature range of -25°C to 85°C, and a rated voltage of 25V. The rated temperature range for an electrolytic capacitor is defined as the maximum voltage range at which the capacitor can be safely used without the risk of failure or thermal breakdown. The rated voltage is the maximum voltage the capacitor can safely take without the risk of failure or thermal breakdown.The EMLA500ADA221MJA0G aluminum electrolytic capacitors are generally used in filtering, energy storage, and coupling applications. In electric filters, the EMLA500ADA221MJA0G are used to separate frequencies from each other. This helps reduce noise and interference in audio systems and power supplies, and can also block certain frequencies from entering a circuit. The EMLA500ADA221MJA0G capacitors can also store energy and release it when needed. In power supply applications, the capacitors store energy when the supply is shut down or overloaded, and then release the stored energy when needed to maintain the power supply. In coupling applications, the capacitors are used to transfer energy between two circuits. The EMLA500ADA 221MJA0G is a relatively low cost aluminum electrolytic capacitor. Its low cost makes it well suited to applications where cost is a primary concern. It is also relatively easy to install and use, which makes it ideal for prototypes and other projects where it is not necessary to have a complicated installation process.Overall, the EMLA500ADA221MJA0G aluminum electrolytic capacitors are low cost, easy to install and use, and are suitable for a wide range of applications. They are well suited for filtering, energy storage, and coupling applications, and can be used in power supplies, power switching, audio systems, digital correction, and general power circuits.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description