EMVA250ADA471MJA0G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are widely used in circuit designs due to their low cost and good performance. The EMVA250ADA471MJA0G aluminum electrolytic capacitor is a type of radial-leaded aluminum electrolytic capacitor, with a voltage rating of 250V, an inductance of 47uF and an impedance of 0.12ohms. This type of capacitor has a wide range of applications and is especially suitable for motor start-up, power factor correction and power grid filter applications.

Application Field

The EMVA250ADA471MJA0G aluminum electrolytic capacitor is suitable for applications such as motor start-up, power factor correction, common-mode filtering, interference suppression, integrated natural peak wave reduction, power grid filter, power supply noise suppression, etc. In addition, this type of capacitor is also suitable for commercial, consumer and industrial applications, including power supplies, frequency converters, UPS systems, LED lighting, switching power supplies and communications systems.

Working Principle

The EMVA250ADA471MJA0G aluminum electrolytic capacitor is an electrolytic capacitor with a special construction, consisting of an anode core, a separator, an electrolyte and a cathode terminal. The anode core is made of a special aluminum foil, which is rolled and woven, providing a large surface area for electric current. The separator is a membrane that separates the anode and the cathode, preventing direct contact between the two. The electrolyte is used to provide a electric field between the anode and cathode. When an electric current passes through the capacitor, electric charges are stored in the anode and cathode, storing electrical energy.

The EMVA250ADA471MJA0G aluminum electrolytic capacitor is a polarized capacitor and the voltage applied across the terminals should not exceed the rated voltage. In addition, it has a limited temperature range of -40°C to +85°C and must not be used in temperature cycles exceeding this range.

The specific data is subject to PDF, and the above content is for reference