EMVH100ADA331MJA0G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors

Aluminum electrolytic capacitors are the most widely used and cost-effective type of capacitor, due to their high capacitance density and low cost. The EMVH100ADA331MJA0G is an example of an aluminum electrolytic capacitor. Their main application fields are filtering, decoupling, and timing.

Application Field

The main application of aluminum electrolytic capacitors is for filtering, decoupling, and timing. They are used to reduce the ripple in switching power supplies, and are also used in DC-DC converters and linear regulators. They are also used in radio, TV, and speaker circuits to reduce noise and improve signal quality.

Aluminum electrolytic capacitors are also used in LED lighting systems, where their low series resistance and intermittent currents are important. In motor drive applications, they are used for capacitor-run induction motors and other motor control applications.

Aluminum electrolytic capacitors are also used as audio frequency and high frequency class-D amplifiers, as they are able to handle high frequencies. Additionally, they are used for storing energy in regenerative braking systems, peak current detection, and harmonic compensation in uninterruptible power supplies.

Working principle

The working principle of an aluminum electrolytic capacitor is based on an anode and a cathode, which are made up of two conducting plates separated by a separator. The separator has electrolyte impregnated in it which is an acidic solution. When a voltage is applied across the plates, ions in the electrolyte solution are attracted to the anode and the cathode. This creates an electric double layer which provides the capacitance of the capacitor.

The ability of aluminum electrolytic capacitors to provide high capacitance in a small physical size is due to the fact that the electric double layer is formed between two very thin layers of aluminum oxide. This layer provides a much higher capacitance than other types of capacitors, due to its large surface area.

The electrolyte used in aluminum electrolytic capacitors is also very important. It is a type of sulfuric acid solution which provides good conductivity and also acts as a dielectric. The sulfuric acid solution has a very high dielectric constant which allows for higher capacitance values in a given area.

The EMVH100ADA331MJA0G aluminum electrolytic capacitor is a high voltage, radial leaded capacitor. It is rated for a capacitance of 330 micro Farads (uF) and has a maximum working voltage of 100 volts. It is suitable for a wide range of applications such as filtering, decoupling, and timing.

In conclusion, aluminum electrolytic capacitors are widely used in a variety of applications because they are able to provide high capacitance in a small physical size, and they are relatively inexpensive compared to other capacitor types. The EMVH100ADA331MJA0G is an example of an aluminum electrolytic capacitor which is suitable for filtering, decoupling, and timing applications.

The specific data is subject to PDF, and the above content is for reference