ESMH800VSD103MA50T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are the most commonly used voltage-dependent capacitors in many different applications. These capacitors can offer several advantages over other capacitor types including long life, high-temperature operation, wide temperature ranges, wide range of capacitance values, and good stability of capacitance over a wide range of temperature ranges. The ESMH800VSD103MA50T is an examples of aluminum electrolytic capacitor and can be used in a wide range of applications depending on its parameters.

Applications

The ESMH800VSD103MA50T aluminum electrolytic capacitor is used to store and release energy to provide power to an electrical circuit or device. The modular design of the ESMH800VSD103MA50T is suitable for use in a wide range of applications including pulse-power technology, industrial, automotive, consumer, and switched-mode power supply (SMPS) applications. It is often used in coupling, DC-link filtering, snubber, and regulator circuits.

The ESMH800VSD103MA50T is used in heavy gauge automotive wire harnessing applications, providing better load carrying capacity than traditional capacitors. It is also used in medical equipment and a variety of industrial and consumer electronics. Common applications include power conversion, motor drive circuits, power supplies, audio, telecommunications, navigational systems, and military systems.

Working Principle

An aluminum electrolytic capacitor is an electrical component consists of two electrodes separated by a dielectric material (electrolyte) and an insulating material (cathode). The sharp edges of the anode electrodes make the plate full of small hills and dips, which improves its surface area for better electrical performance. When the power is applied to the capacitor, the electrolyte between the anode and the cathode becomes ionized, which creates a current flow across the capacitor, allowing it to store energy. The capacitor can later discharge and release the stored energy.

The ESMH800VSD103MA50T is a non-polarized and low-resistance capacitor with a reverse current rating of 5uA max. It can store up to 1.2 Farad of energy with a capacitance tolerance of +10%/-20%. The ESMH800VSD103MA50T has a voltage rating of 800V DC and a working temperature range of -40°C to 105°C and a maximum operating temperature of 125°C. It has an impedance of 6.7m at 1 kHz and 10% reduction in capacitance at a frequency of 70Hz.

Conclusion

The ESMH800VSD103MA50T aluminum electrolytic capacitor provides excellent electrical performance and long life for applications such as pulse-power technology, industrial, automotive, consumer, and switched-mode power supplies. It is a non-polarized and low-resistance capacitor with a reverse current rating of 5uA max. The ESMH800VSD103MA50T can store up to 1.2 Farad of energy and has a capacitance tolerance of +10%/-20%. It has a voltage rating of 800V DC and a working temperature range of -40°C to 105°C.

The specific data is subject to PDF, and the above content is for reference