F6KA2G535L4AM-Z Filters

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Surface Acoustic Wave (SAW) filters are popular in telecommunications applications. They are used to separate signals, suppress noise, and control the direction and flow of a communication signal. The F6KA2G535L4AM-Z is a SAW filter designed for use in broadcast applications. It utilizes a refracting material to create an acoustic reflection that prevents high-frequency signal interference.

The F6KA2G535L4AM-Z SAW filter is composed of a substrate, a top layer, a coplanar waveguide (CPW), and an acoustic reflector. The substrate is typically made of quartz, Ceramic or piezoelectric material that absorbs the acoustic energy created by the CPW, and transmits it to the top layer. The top layer usually consists of a thin film of aluminium or tantalum manganese, which acts to reflect the acoustic energy. The CPW is the actual filter that imparts operating frequency to the filter. It is made up of two sets of flat metal strips that run parallel to each other. The acoustic reflector is usually a thin film of quartz, which reflects the acoustic energy and prevents high-frequency signal interference.

The F6KA2G535L4AM-Z SAW filter is designed to meet broadcast industry requirements. It is highly integrated, allowing for output signals with excellent signal-to-noise ratio and minimal phase errors. The filter also provides excellent image rejection and performance in the presence of distortion. It can be used for applications such as AM, FM, and Microwave Radio, as well as cellular and satellite communications.

The working principle of the F6KA2G535L4AM-Z is based on refraction. This occurs when the acoustic signals bounce off a material such as quartz or Ceramic and are then separated by the two sides of the CPW. The reflected signals then interact with the other side of the CPW, creating an impedance mismatch, which blocks out higher frequency signals. This allows low frequency signals to pass through the filter and be further transmitted. This ensures that low frequency signals are transmitted with minimal interference from higher frequencies.

The F6KA2G535L4AM-Z SAW filter is a reliable and efficient component for broadcast applications. It provides excellent signal-to-noise ratio and image rejection, and offers superior performance in the presence of distortion. It is highly integrated, allowing for enhanced operating frequency and excellent phase accuracy. The filter’s refracting material allows for higher frequency signal interference to be blocked, allowing low frequency signals to pass through the filter with minimal interference.

The specific data is subject to PDF, and the above content is for reference