FERD15S50DJF-TR Discrete Semiconductor Products

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes, more commonly known as rectifiers, are semiconductor devices composed of an anode and a cathode. They are capable of rectifying current from alternative current (AC) to direct current (DC) and are used in a wide variety of applications. FERD15S50DJF-TR is a type of diode rectifier suitable for high power applications and can be used as a circuit breaker due to its large current capacity.

The FERD15S50DJF-TR is a single-phase, medium-power diode rectifier. It is rated for 15 A in its continuous mode of operation, 50 A in its peak mode of operation, and has a maximum reverse voltage of 1000 V. It has an operating temperature range of -55°C to 150°C and a junction temperature of 150°C. This makes it suited for high power applications such as power supplies, DC power converters, rectifiers, AC to DC conversion, and surge suppression devices. Additionally, due to its high current capacity, it is suitable for use as a circuit breaker in high power applications as well.

The working principle behind the FERD15S50DJF-TR is a straightforward application of diodes. When the anode voltage (V_A) is higher than the cathode voltage (V_K), the diode is said to be in forward mode. This results in a current flowing from anode to cathode as determined by the diode’s I-V curve. When the reverse voltage (V_R) is applied, meaning that V_A is lower than V_K, the diode acts as an open switch, i.e., no current flows from anode to cathode. This is called the reverse mode of operation of the diode.

The FERD15S50DJF-TR diode is composed of a silicon substrate with a P-N junction formed by diffusing impurities into the substrate. To enhance the diode’s characteristics, the P-N junction has a heavily doped region near it, which is known as the junction termination extension (JTE). The JTE region reduces the voltage needed to drive the diode into its forward biased mode and also reduces the recovery time needed after the diode is disconnected from the reverse biased mode.

Due to the P-N junction configuration of the diode, it exhibits a nonlinear I-V curve. This nonlinear behavior is necessary to obtain full-wave rectification from an AC input signal, and is the basis for the many applications where diodes are used. Additionally, due to the JTE configuration, it has a low forward voltage drop, which further reduces power consumption in the device.

The FERD15S50DJF-TR is capable of withstanding large transient over-voltage and over-current signals due to its high-power characteristics, making it suitable for harsh environment and high-power applications. It also has a low output capacitance, which reduces the circuit ringing and EMI generated due to the fast switching of the diode. This makes the FERD15S50DJF-TR ideal for high speed switching applications, such as those used in motor drives and power converters.

In conclusion, the FERD15S50DJF-TR single-phase diode rectifier is an advanced device for providing high-efficiency and low-loss rectification of AC signals to DC signals. Its large current capacity, combined with its low forward voltage drop, make it an ideal choice for power supplies, rectifiers, and circuit breakers in a wide variety of applications. Additionally, its low output capacitance and high transient over-voltage and current ratings make it suitable for high-speed switching and harsh environment applications.

The specific data is subject to PDF, and the above content is for reference