FERD20S100STS

Series:	--
Packaging:	Tube
Part Status:	Active
Diode Type:	FERD (Field Effect Rectifier Diode)
Voltage - DC Reverse (Vr) (Max):	100V
Current - Average Rectified (Io):	20A
Voltage - Forward (Vf) (Max) @ If:	780mV @ 10A
Speed:	Fast Recovery = 200mA (Io)
Current - Reverse Leakage @ Vr:	100µA @ 100V
Capacitance @ Vr, F:	--
Mounting Type:	Through Hole
Package / Case:	TO-220-3
Supplier Device Package:	TO-220AB
Operating Temperature - Junction:	175°C (Max)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

A FERD20S100STS is a single-phase rectifier which has a variety of uses in a number of electronics applications. It is capable of rectifying AC voltage to DC voltage efficiently, and has low forward voltage drop at high temperatures. As such, the FERD20S100STS is well-suited for applications such as voltage regulation, power supply circuit, motor control, and lighting ballasts. In this article, we will discuss the various application fields of the FERD20S100STS, as well as its working principle.

Application Fields

The FERD20S100STS is a highly efficient rectifying device, which makes it an ideal choice for a number of applications. In the following sections, we will discuss several of these application fields in detail:

Voltage Regulation

The FERD20S100STS is commonly used in power supplies and DC-DC converters to provide regulated voltage. It is capable of transforming an AC input voltage to a more steady, usable DC voltage. The FERD20S100STS acts as a rectifying diode, meaning that it allows current to flow in one direction - from the AC power source, to the DC output. This helps ensure that the output voltage remains consistent, even if the AC input voltage fluctuates.

Power Supply Circuits

The FERD20S100STS is also used in power supply circuits, especially for those that require a regulated output voltage. As the rectifying diode is capable of withstanding high temperatures and has a low forward voltage drop, it is well suited to use in power supply circuits, where allowing steady voltage output is essential. The FERD20S100STS is often used in power supplies in which the output voltage needs to be maintained at a constant level, even in cases of fluctuating AC/DC input voltages.

Motor Control

The FERD20S100STS is also used in motor control circuits. It can be used to regulate the current flowing to a motor - by allowing current to flow in one direction, the FERD20S100STS helps to ensure that the motor is working at its peak efficiency, even in cases of fluctuations in AC/DC input voltage. The low forward voltage drop at high temperatures makes the FERD20S100STS an ideal choice for motor control circuits, as it helps ensure that the output voltage remains consistent even at high temperatures.

Lighting Ballasts

Finally, the FERD20S100STS is also often used in lighting ballasts, such as those found in fluorescent light fixtures. Like in power supply circuits, it helps regulate the input voltage, making sure that the output voltage remains consistent, even when there are fluctuations in the input voltage. The low forward voltage drop at high temperatures also makes it well suited to large-scale lighting ballasts, where heat dissipation can be a major concern.

Working Principle

The FERD20S100STS is a single-phase rectifier. It works by allowing current to flow in one direction only - from the AC power source, to the DC output. This ensures that the output voltage remains consistent, even if the input voltage fluctuates. The FERD20S100STS is made up of two diodes, in series, connected to four terminals. The two diodes act to ensure that current can only flow in one direction. As current flows through the two diodes, it is “rectified” - meaning that it is transformed from an AC voltage to a DC voltage. The rectified voltage can then be used as a usable DC output voltage. The FERD20S100STS has a low forward voltage drop, which means that it is capable of dissipating large amounts of heat. This makes it well-suited to applications which require high temperatures, such as motor circuits and lighting ballasts.

Conclusion

The FERD20S100STS is a single-phase rectifier which is used in a variety of applications, such as voltage regulation, power supply circuits, motor control, and lighting ballasts. It works by allowing current to flow in one direction only - from the AC power source, to the DC output. This ensures that the output voltage remains consistent, even if the input voltage fluctuates. Furthermore, the FERD20S100STS has a low forward voltage drop at high temperatures, which makes it well suited to applications which require high temperatures. In conclusion, the FERD20S100STS is a highly efficient rectifier, which can be used in a variety of electronics applications, thanks to its low forward voltage drop at high temperatures and its ability to rectify a wide range of input voltages.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description