FES8FT-E3/45

Introduction

FES8FT-E3/45 is a single-phase, high-power rectifier bridge designed for use in industrial and commercial applications. The rectifier bridge has an excellent performance level, making it ideal for applications such as electric power supply, hoisting, de-icing, railway communication, welding and lighting systems.

FES8FT-E3/45 Application Field

The FES8FT-E3/45 rectifier bridge is suitable for general low power connected to motors and other expensive electrical components and appliances. It has a high current passing capacity of up to 450A, excellent temperature and voltage rating, and fast switching speed. It can provide reliable and safe rectification. FES8FT-E3/45 single-phase high power rectifier bridge can be used in fields such as electric power supply, hoisting, de-icing, railway communication, welding, and lighting systems.

Working Principle

The FES8FT-E3/45 single-phase high-power rectifier bridge acts as a direct current bypass in the electric circuit. It has a built-in switching element and rectifier diode. Four rectifier diodes in series with different polarities may work together or individually as per application requirements. The rectifier diode has a standard forward voltage across its terminals. When the forward voltage exceeds this value, the bridge starts conducting the current through the direction specified by the arrowhead. Otherwise, it will remain reverse biased and won’t allow the current to pass. The active pressure drops through the diode from the negative phase to the positive phase of the AC. In other words, the diode acts as a rectifier in the FES8FT-E3/45 rectifier bridge.

When an alternating current, such as an AC mains voltage, is supplied to the rectifier, it allows only one direction of current flow. Thus it converts an alternating current into a DC. The FES8FT-E3/45 rectifier bridge can handle up to 400A of high direct current, providing a higher degree of protection against short circuits and can be used in various fields.

Conclusion

The FES8FT-E3/45 is a single-phase, high-power rectifier bridge designed for use in industrial and commercial applications. It is suitable for general low power connected to motors and other expensive electrical components and appliances. The rectifier bridge has an excellent performance level and can provide reliable and safe rectification with a current passing capacity of up to 450A. The FES8FT-E3/45 works by allowing only one direction of current flow and can thus convert an alternating current into a direct current. It can be used in fields such as electric power supply, hoisting, de-icing, railway communication, welding, and lighting systems.