FODM3021R4V

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are used in high voltage applications to provide fail-safe isolation between a control circuit and a load. One such device is the FODM3021R4V which features a Triac, SCR Output. This device is ideal for switching mains appliances in automated systems such as for temperature and lighting control.

The FODM3021R4V is a four-pin Opto-isolator which provides a non-contact, opto-electric interface between a low-voltage input and a mains (high voltage) output. The input to the opto-isolator is provided by an LED which, when switched on, triggers the output device - a Triac, SCR (silicon controlled rectifier).

The Triac, SCR is a two-terminal semiconductor switch which acts as an electrical switch to control an AC power load. It works by allowing current to flow in both directions across the two terminals and can be used to regulate voltage or current in a circuit. When the input LED is switched on, the Triac, SCR is activated and, depending on the current state of the input signal, either the passive or the active portion of the triac will switch on, allowing current to flow in either direction across its two terminals. This current flow can be used to switch any AC power load such as a light, motor or appliance.

Another key feature of the FODM3021R4V is its reverse polarity protection, which prevents the Triac, SCR from being damaged if the input signal is reversed. The device is also provided with over-voltage protection which prevents the LED from being damaged if the output voltage exceeds its specified rating. Furthermore, the device is protected against excessive temperature, vibration and electromagnetic interference.

The FODM3021R4V is an ideal choice for applications in which reliable, fail-safe switching of mains devices is required. Its combination of opto-isolation and Triac, SCR output makes it easy to use and provides great flexibility for controlling a wide range of AC power loads in automated systems.

The specific data is subject to PDF, and the above content is for reference