FODM3011R1V

Current - On State (It (RMS)) (Max):	70mA
Approvals:	BSI, CSA, UL, VDE
Supplier Device Package:	4-Mini-Flat
Package / Case:	4-SMD, Gull Wing
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 100°C
Current - DC Forward (If) (Max):	60mA
Voltage - Forward (Vf) (Typ):	1.2V
Turn On Time:	--
Current - Hold (Ih):	300µA (Typ)
Series:	--
Current - LED Trigger (Ift) (Max):	10mA
Static dV/dt (Min):	10V/µs (Typ)
Voltage - Off State:	250V
Voltage - Isolation:	3750Vrms
Number of Channels:	1
Zero Crossing Circuit:	No
Output Type:	Triac
Part Status:	Obsolete
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators - Triac, SCR Output

Opto-isolators are semiconductor devices which are used to provide electrical isolation between two parts of a circuit. The most common type is the Triac-SCR output opto-isolator. These devices use light, usually infrared light, to transfer a signal from one part of the circuit to another with minimal power requirements and no direct connection.The FODM3011R1V opto-isolator is a monolithic integrated circuit that provides a choice between Triac or SCR output. The device is designed for the isolation of load side AC power systems from drive control signals. It is a type of I/O analog switch, meaning that it can be used to connect, disconnect, turn on, and off an output device such as a relay, motor, or solenoid.The device uses an internal LED as its light source. This LED is connected to the drive side of the circuit. The other side of the circuit is connected to an optically coupled terminal. The terminal contains a photodetector which converts the light energy from the LED into anelectrical output signal. The output signal is then used to control the state of the switch.The FODM3011R1V is typically installed near the load side AC power system. It can be used to control devices such as solenoids, relays, and motors. The opto-isolator also protects the drive side of the circuit from ground-fault currents. This is important in applications where ground-fault currents could cause damage or other hazards.The working principle of the FODM3011R1V is based on the electrical isolation of two circuits using light. When the LED is turned on, it emits infrared light. This light is then detected by the optically coupled terminal and converted into an electrical signal. This signal is then used to control the state of the switch. Depending on the type of switch chosen, either a Triac or SCR, the type of output signal is adjusted accordingly.In conclusion, the FODM3011R1V opto-isolator is a type of I/O analog switch used to control the state of an output device such as a relay, motor, or solenoid. Its main advantage is its ability to provide electrical isolation between two parts of a circuit. The device utilizes an internal LED connected to the drive side of the circuit and an optically coupled terminal connected to the load side. The LED emits infrared light, which is detected and converted to an electrical signal. This is then used to control the state of the switch, either a Triac or SCR. The FODM3011R1V is commonly used in applications where ground-fault currents could cause damage or other hazards.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description