FODM3021R4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The FODM3021R4 optoisolator is part of the growing family of Triac and SCR Output optoisolators. The FODM3021R4 optoisolator series is designed to safely and accurately detect, control, and isolate AC loads, such as appliances, industrial machines, and lighting systems. It is suitable for use with both Triac and SCR output optoisolators.

The FODM3021R4 optoisolator features a high reliability, low power, wide operating temperature range and low leakage low optical performance. It is designed for use in home appliances, industrial machines, medical equipment, lighting systems, and renewable energy equipment. The optoisolator has a 4-pin dual-in-line (DIP) package and is engineered with advanced isolation technology.

The FODM3021R4 opto-isolator features a 30mm diameter ceramic package and is designed for both short-term and long-term operation. The device supports a maximum voltage of 600V, and its power dissipation rating is 9W at 25°C. The maximum steady-state emission current is 8mA and the response speed is 200μs, ensuring optimum electrical isolation and low response times. Due to its high reliability and low EMI performance, the FODM3021R4 is suitable for use in industrial, commercial, and consumer applications.

The working principle of the FODM3021R4 optoisolator is based on the detection and isolation of AC loads by using a light source and a photodiode. The light source is typically an infrared LED (light emitting diode) which emits infrared light when an AC load is connected. This light is detected by a photodiode, located on the opposite side of the package, and converted into an electrical signal.

The electrical signal is amplified and used to control the power switch. When the power switch is activated, the AC load connected is energized. To further improve the isolation performance of the opto-isolator, an external capacitor can be connected to the opto-isolator. This capacitor helps ensure that the AC load is not affected by any unwanted electrical noise from the outside.

The FODM3021R4 optoisolator is suitable for applications where a high level of isolation is needed, such as medical instruments, robotic equipment, and cable TV boxes. The device also features a low power consumption, wide operating temperature range, and low leakage low electrical performance making it particularly suitable for industrial, commercial, and consumer applications. Additionally, its advanced isolation technology and fast response times ensure that the output is reliable and accurate.

The specific data is subject to PDF, and the above content is for reference