FODM3022R3V Isolators

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

FODM3022R3V is a module in the family of optoisolators. They are used to electrically isolate two circuits while allowing them to interact. Specifically, the FODM3022R3V is categorized under Triac, SCR Output optoisolators, meaning it has a triac or SCR output.

Application Fields

Typically, FODM3022R3V optoisolators are used for various switching and timing applications, often where fast switching times are needed. These include AC/DC and DC/AC applications, such as Appliance Control (where triacs are most commonly used), Lighting Control, Power Factor Correction (PFC), and Reverse Battery Protection. With the ability to switch AC and DC signals, and the ability to drive triacs or SCRs, FODM3022R3V provides a wide range of applications.

Working Principle

The FODM3022R3V consists of two parts: an input side optocoupler and the output side. The input side has an infrared LED, which is triggered by the application’s input signal. On the output side is a triac or SCR, which will switch in response to the input signal. When triggered, the LED will emit a light that reaches the output side, where it is converted to an electrical signal. This electrical signal is then amplified and output from the output side, triggering the triac or SCR.

In addition, FODM3022R3V has a protective diode on the output side to protect against the destructive reverse voltage generated by the triac or SCR when switched off. This diode also provides the necessary insulation value for application safety.

The specific data is subject to PDF, and the above content is for reference