FODM3023

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are components used in electrical circuits in order to isolate two or more parts of the circuit from each other. They are used to provide galvanic isolation between the parts in order to reduce the possibility of damage to the components from stray electrical fields. One particular type of optoisolator is the FODM3023, a triac or SCR-output optoisolator.

The FODM3023 contains a LED (Light Emitting Diode) transmitter and a photo-sensitive silicon solid-state device (SCR or triac) as its main components. When an electrical signal is sent to the LED transmitter, it emits light that is detected by the photo-sensitive components of the optoisolator. This light causes a current to be activated in the output section of the optoisolator, which is then used to drive the load.

The FODM3023 can be used in applications where it is necessary to provide a level of electrical isolation between the input and output circuitry, such as in appliances, medical equipment and industrial controls. It can provide a simple and cost-effective method of providing isolation between digital and analog circuitry. The FODM3023 can also be used to control the power state of a low voltage DC circuit, such as an alarm system or HVAC (Heating, Ventilation, and Air Conditioning) system.

The working principle of the FODM3023 is relatively simple. When an electrical signal is applied to the LED transmitter, it emits light in the visible spectrum. This light is detected by the output components of the optoisolator (the SCR or triac). This causes a current to be activated in the output section of the optoisolator, which is then used to control the load.

The FODM3023 also provides enhanced protection from transients, surges, and electromagnetic interference (EMI). It has wide operating temperature range (from -40°C to +125°C) and is capable of switching loads up to 25A. It is also RoHS (Restriction of Hazardous Substances) compliant. The FODM3023 is an ideal solution for applications where a high level of electrical isolation and protection is required, as well as for applications where a low-voltage DC circuit must be accurately and reliably controlled.

In conclusion, the FODM3023 is an inexpensive and highly efficient optoisolator with triac and SCR output options. It provides electrical isolation and protection from transients and electromagnetic interference, and is compliant with RoHS regulations. It is suitable for a wide range of applications where a reliable level of electrical isolation is required, and can be used to accurately and reliably control low voltage DC circuits.

The specific data is subject to PDF, and the above content is for reference