FODM3051R1V

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators - Triac, SCR Output, are a type of switching components that are capable of handling high voltage, high current and power, with isolation between the control signal and output. The FODM3051R1V is one such example of an optoisolator. This application note looks at its application field, working principle and relevant parameters.

The FODM3051R1V is an eight-pin surface mount optoisolator with a zero crossing thyristor output. Its operating voltage range is between 4.5-26V, with a typical current of 10mA for direct control of resistive and inductive loads, such as triacs, SCRs and relay coils. It is particularly used for AC line detection and its trigger circuit is suitable for use in many motion control applications, such as those in appliances such as washing machines.

In terms of working principle, the FODM3051R1V is essentially an electrical isolation device. It has an infrared light-emitting diode, which is also called an internal signal source, connected with a photosensitive silicon semiconductor, which is also referred to as an external photosensitive element. When the input signal (control circuit) turns ON, the collector voltage increases and turns the light-emitting diode ON, so light is sent from the light-emitting diode to the photosensitive semiconductor where a current is generated by the light. This current is able to pull the output and turn the triac, SCR or relays, ON.

The FODM3051R1V has a few important parameters. Its dielectric strength is 3kV (DC) between input and output, with is 6mA current rating is from 4.5V-26V. It an isolation voltage of 2000Vrms (between input and output). It can handle up to 10A resistive/ inductive loads, and its response time can vary depending on temperature (from 18-50°C). The maximum peak gate voltage for a triac/ SCR is 800V, and for relay coils it is 1000V. The FODM3051R1V comes with a 60V/s dv/dt snubber network.

The FODM3051R1V is capable of switching between AC and DC devices, and is mainly used in motion control applications, like washing machines. It offers high precision control and is suitable for a range of switching applications. It also provides dependable electrical isolation, strong dielectric strength, and is capable of working with high voltage, and is highly reliable. With such features, the FODM3051R1V is perfect for applications that require strong electrical isolation and reliable performance.

The specific data is subject to PDF, and the above content is for reference