FODM3051R4V

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are semiconductor devices used for isolating signals from different circuits. They can be used for electrical signal isolation, capacitive line isolation, and optical line isolation. Optoisolators can also be used for noise reduction and surge protection. FODM3051R4V is a type of Optoisolators - Triac, SCR Output. This type of optoisolator is a photovoltaic output IC and is suitable for applications that require low-voltage, low-current, AC/DC control.

The FODM3051R4V has a wide operational range due to its low-voltage and low-current requirements. It is suitable for working continuously in any environment within a temperature range of -40°C to +85°C. This makes it suitable for both indoor and outdoor applications. The FODM3051R4V comes in an insulated package that helps reduce the possibility of electrical shock.

FODM3051R4V has a three-pin pin-out configuration. The pins are labeled as VCC, Input, and Output. VCC is used to supply the power to the optoisolator and the Input and Output pins are used to connect the circuit to the device. The Input port is connected to an external trigger, usually a pulse signal from a control circuit. The Output port is connected to a triac or SCR, respectively. When the external trigger is applied, the output of the optoisolator is triggered, and a signal is sent to the triac or SCR to activate it.

The working principle of the FODM3051R4V is to isolate the signal coming from the circuit and output a signal to the triac or SCR. The internal circuit of the optoisolator contains an LED which acts as a light source on one side and a photocell on the other side. The LED is connected to the Input port and the photocell is connected to the Output port. When the external pulse signal is applied, the LED emits light which is detected by the photocell. This activates the Output port, which sends the signal to the triac or SCR to activate it.

The Optoisolators - Triac, SCR Output, like the FODM3051R4V, are widely used in various electrical circuits for signal isolation, noised reduction, and surge protection. These are commonly used in industrial applications that require low-voltage, low-current, AC/DC control. They can also be used in home automation systems, motor control, and other applications that require signal isolation and noise reduction.

The specific data is subject to PDF, and the above content is for reference