FODM3052-NF098

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are components used to transmit electric signals between isolated circuit blocks. They are useful in applications that require electrical isolation and high levels of protection. FODM3052-NF098 is an optoisolators - Triac, SCR Output, and it offers electrical isolation up to 8kV and low output current (1mA).

The FODM3052-NF098 consists of a LED (Light Emitting Diode) and an SCR (Silicon Control Rectifier) or TRIAC (Triode for Alternating Current), which are optically coupled. The LED is driven by the input AC signal, and it generates light pulses, which are collected by the photo sensitive SCR or TRIAC. The LED and SCR/TRIAC are optically isolated, which means that there is no electrical connection between them. This implies that the FODM3052-NF098 isolates the input circuit from the output circuit. Because of the high switching speed of the LED and SCR/TRIAC, the FODM3052-NF098 can respond to rapidly changing input signals.

The primary application of FODM3052-NF098 is interfacing of AC signal circuits with digital logic circuits. Digital logic circuits require a low voltage (5V-12V), whereas AC signals are at a much higher voltage (110V-220V). The FODM3052-NF098 provides electrical isolation between the two so that the digital logic circuits are protected from the higher voltage AC signals. The SCR/TRIAC output of the FODM3052-NF098 isolates the input AC signal, and passes a low current (1mA), low voltage (5V-12V) signal to the digital logic circuit.

The FODM3052-NF098 can also be used as an AC Load switch. The LED input signal is controlled by a low voltage input signal. This input signal controls the LED light pulses which in turn control the SCR/TRIAC output. When the LED is off, the SCR/TRIAC is in an open state and the AC load is isolated from the AC voltage supply. When the LED is on, the SCR/TRIAC closes, and the AC load is connected to the AC voltage supply. The FODM3052-NF098 is often used in applications such as motor control, lamp dimming and temperature control.

In conclusion, the FODM3052-NF098 is an Optoisolator - Triac, SCR Output which provides electrical isolation. Its primary application is for interfacing AC signal circuits with digital logic circuits, and it can also be used as an AC load switch. It is able to withstand high levels of isolation (8kV) and offers a low output current (1mA) for digital logic circuits.

The specific data is subject to PDF, and the above content is for reference