FODM3052R4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

FODM3052R4 is an optoisolator that has a triac or SCR (silicon controlled rectifier) output. It is an optocoupler device, offering an additional level of insulation in the circuitry which allows the user to transfer a digital or analog signal between circuits with no direct electrical connection.

Application Field

FODM3052R4 is an isolated thyristor switch designed primarily for power switching applications. It can be used in motor controller designs, including brushless or brushed DC and AC motors, inductive loads and Dimmable drivers. Its fast switching time, combined with its low “on” resistance, makes it suitable for switching applications of up to 8A @ 400V AC or 8A @ 600V DC. Its insulation rating of 5kVrms makes it suitable for high voltage applications.

The FODM3052R4 is also applicable in other control and regulating applications, such as emergency power cut-off, temperature control, and electronic control of lighting or similar devices. It is also suitable for medium or high power applications, such as electric heaters, air conditioners and power supplies.

Working Principle

The FODM3052R4 isolator consists of an LED and a triac/SCR optically coupled in a single package. An electrical signal is sent to the LED, which emits light that is detected by a photosensitive device. The light triggers a thyristor switch, which then closes an electrical circuit and switches the output device.

The FODM3052R4 has a creepage distance of 8mm, which reduces the risk of dangerous spark-over due to a high voltage in the environment. Its triple series connection allows for switching applications with voltage ratings up to 400V AC / 600V DC.

The FODM3052R4 also features a low internal capacitance, allowing it to switch higher frequency signals, such as those found in motor and power systems. This makes it suitable for applications where fast switching speeds are important. Additionally, its N-channel linearity allows it to accurately control both analog and digital signals.

Conclusion

The FODM3052R4 is a medium voltage optoisolator with a triac or SCR output. Its isolation rating of 5kVrms makes it suitable for high voltage environments, and its fast switching time and low “on” resistance allow it to be used in power switching applications of up to 8A @ 400V AC or 8A @ 600V DC. Additionally, its low internal capacitance and N-channel linearity allow it to accurately control both analog and digital signals. Altogether, the FODM3052R4 is a reliable and versatile device for a wide variety of switching applications.

The specific data is subject to PDF, and the above content is for reference