GBJ25005-BP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A bridge rectifier circuit is an electrical component consisting of an array of four diodes in a closed circuit configuration that allows a single voltage to be applied and rectified into an alternating current (AC) supply. The GBJ25005-BP rectifier is a single-phase, full-bridge diode array designed to convert an AC voltage source into a DC voltage. It is typically used in applications such as DC power supplies, UPS systems and other applications that require conversion of AC power to DC power.

The GBJ25005-BP rectifier utilizes four power diodes, each of which are arranged in a linear fashion within the rectifier. Each diode has an anode terminal and a cathode terminal, which allow for current to flow in only one direction through the device. The two anode terminals of the four different diodes are connected to a common point. The two anode terminals are then connected to the AC voltage source while one cathode terminal is connected to the positive voltage lead and one cathode terminal is connected to the ground. The AC voltage source is then rectified and is output through the common point at the anode terminals.

The device is capable of handling up to 25A of current and is designed to operate in temperatures ranging from -55°C to 100°C. It has a range of operating frequencies between 50Hz to 400Hz and its maximum reverse voltage is 80V.

In order to optimize the performance of the GBJ25005-BP rectifier, it is important to ensure that the necessary components are included within the circuit. It is important to include a snubber across each of the opposing diode terminals as this reduces the di/dt, voltage overshoot, and ringing of the bridge. A heatsink should also be included to ensure the bridge rectifier is not operating beyond its rated parameters. An electrolytic capacitor should also be connected across the common point of the anode terminals and connected to the DC voltage as this serves to increase ripple filtering.

The specific data is subject to PDF, and the above content is for reference