GBJ2506-BP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A GBJ2506-BP Bridge Rectifier is a diode used to convert alternating current (AC) into direct current (DC). The circuit is constructed with four diodes in a “bridge” configuration that produces a full-wave rectified output from an AC input. The four diodes have the following arrangement; one diode is placed in each of the upper and lower left side nodes, and the other two diodes are placed in the upper and lower right side nodes, forming an electrical bridge.

The GBJ2506-BP is a bridge rectifier composed of a single package containing four separate diodes, rather than having four individual diodes. It also offers superior thermal resistance when compared to individual four diodes.

This bridge rectifier can find applications in power supplies, air conditioners, industrial electrical equipment, motors, and transformers. It is also used in battery chargers, voltage regulators, lamps, DC motors, and other devices powered by AC current.

The working principle of a GBJ2506-BP Bridge Rectifier is based on the use of diodes to convert AC current into pulsating DC current. When AC current is inputted into the bridge rectifier, two of the diodes become forward-biased, which allows the current to pass through them in the same direction as the AC voltage. At the same time, the other two diodes become reverse-biased, which causes them to block the current from passing through them in the opposite direction of the AC voltage. The resulting output is a pulsating DC current that is the same magnitude as the input AC voltage.

The GBJ2506-BP can operate at frequencies up to 2MHz. It is also designed to handle forward current ratings of 1A if a suitable heat sink is present, or 2A without such a sink. The device has an operating temperature range of -40°C to 125°C, a thermal resistance value of 0.46°C/W, a reverse recovery time (Trr) of 15µs, and a forward voltage drop of 0.9V.

In conclusion, the GBJ2506-BP is a bridge rectifier comprised of four individual diodes in a bridge configuration. It can handle a maximum current rating of 1A when a heat sink is present, and 2A without one. This device is suitable for applications such as power supplies, air conditioners, industrial equipment, and other AC to DC applications. Its working principle is based on the use of diodes to convert AC current into pulsating DC current.

The specific data is subject to PDF, and the above content is for reference