GBJ2506-03-G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are semiconductor devices used widely in applications such as voltage rectification, power stabilization, and signal modulation. Bridge rectifiers are one type of diode that is widely used in different applications in power electronics. GBJ2506-03-G is a bridge rectifier with a maximum repetitive peak reverse voltage (VRRM) of 600 volts and a maximum average on-state current (IO) of 8.0 amps. This article will discuss the applications and working principle of GBJ2506-03-G.

Applications

GBJ2506-03-G bridge rectifiers are used extensively in applications that require higher voltage rectification. It is often used in high power power supplies, motor controls, and AC to DC converters due to its high surge current capabilities and high peak reverse voltage rating. Additionally, it can be used in power tools, industrial, and consumer electronics due to its low noise and maximum input frequency (40KHz).

Working Principle

GBJ2506-03-G rectifiers are based on a four-diode bridge circuit. When alternating current (AC) is applied to the bridge, the current path is completed by loading and unloading the two diodes in the middle of the bridge. This process occurs repeatedly, resulting in the conversion of AC to DC.

During the positive half cycle of the AC, the voltage applied to the anode of one of the diodes in the bridge is higher than the voltage on the cathode of the other diode. This causes current to flow from the anode to the cathode, completing the circuit.During the negative half cycle, the same process occurs and the current flows in the opposite direction. This alternating current causes bridge rectifier circuits to regularly switch the direction of the current, resulting in the output of a smooth and continuous direct current (DC) output.

Conclusion

GBJ2506-03-G bridge rectifiers are a type of diode that is ideal for applications that require higher voltage rectification and have high surge current capabilities. Their working principle is based on a four-diode bridge circuit which is completed by loading and unloading two diodes during alternating current. This results in the conversion of AC to DC, providing a smoother and continuous direct current output.

The specific data is subject to PDF, and the above content is for reference