GDZ2V7B-HE3-18

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are a type of semiconductor component that can be used to either allow or prevent the flow of electrical current in a circuit. Zener diodes, also referred to as voltage regulator diodes, are a type of diode designed specifically to regulate the amount of voltage present in a given circuit. The GDZ2V7B-HE3-18 is a type of single Zener diode developed to address certain issues relating to voltage regulation in certain applications. This article will discuss the application field and working principle of this device.

The GDZ2V7B-HE3-18 is specifically designed to be used as a dual-stage reverse protection component in DC-to-DC converters. It is designed to prevent a circuit from breaking due to excessive voltages present in the input line. The device has a reverse current of less than 2 mA, a maximum operating temperature of 125°C, and a breakdown voltage of 7.4V.

The allowance of current in a circuit is primarily determined by the amount of voltage present. By regulating the voltage present in a given circuit, Zener diodes can ensure a sufficient amount of current is able to flow, while at the same time preventing excessive amounts of current from running, which can lead to the destruction of components. The GDZ2V7B-HE3-18 is designed to limit the amount of reverse current in the circuit, particularly in conditions of excessive voltage.

The working principle of the GDZ2V7B-HE3-18 is fairly straightforward. When the forward voltage of the diode is sufficient, the diode is able to act as a conductive path, allowing current to flow through the circuit in a conventional manner. However, if the voltage present in the circuit surpasses the breakdown voltage, the diode will not allow any current to pass through. Instead, the current will be diverted, preventing destruction of the circuit.

In summary, the GDZ2V7B-HE3-18 is a type of single Zener diode specially designed to be used as a dual-stage reverse protection component in DC-to-DC converters. The device has a reverse current of less than 2 mA, a maximum operating temperature of 125°C, and a breakdown voltage of 7.4V. Its primary purpose is to limit the amount of reverse current in the circuit by diverting it when excessive voltages are detected, thus preventing destruction of the circuit. Its working principle is based on the simple premise that when the forward voltage is sufficient, the diode acts as a conductive path, allowing current to flow through the circuit, but will instead divert the current if the voltage surpasses the breakdown voltage.

The specific data is subject to PDF, and the above content is for reference