GSOT03C-HT3-GS08 Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS (Transient Voltage Suppression) diodes are one of the important components used for protecting electronic circuits against overvoltage transients. The GSOT03C-HT3-GS08 is a state-of-the-art TVS diode especially designed for high frequency applications, with very high peak pulse power and a relatively low clamping voltage.

In order to understand the GSOT03C-HT3-GS08, it is important to first understand the function and purpose of TVS diodes. A TVS diode is a semiconductor device which is used to protect circuits against excessive voltage transients, such as electrostatic discharges and surges. The diode is designed to short out and clamp the voltage to a known voltage level, thus protecting the circuit from potential damage. The GSOT03C-HT3-GS08 is a high frequency TVS diode which is specifically designed for this application.

The GSOT03C-HT3-GS08 is a unidirectional diode, meaning that it passes current in one direction only. It is packaged in a small 2-pin SOT-23 case, making it highly suitable for use in a range of applications including automotive, medical and consumer electronics.

The diode’s typical peak pulse power rating is 1000 watts, making it suitable for use in a variety of high frequency applications. Its breakdown voltage is typically 6 volts, while its clamping voltage, the voltage that the diode will clamp an overvoltage transient at, is 3 volts. This is a relatively low clamping voltage, making it suitable for applications where high voltage protection is required.

The working principle of the diode is one of reverse biasing. When reverse biased, the diode is essentially an open circuit. However, if the voltage across the diode exceeds its breakdown voltage, the diode will “break down” and start to conduct current, thus shorting out the overvoltage transient and clamping the voltage at its clamping voltage.

As mentioned previously, the GSOT03C-HT3-GS08 TVS diode is specifically designed for high frequency applications, such as ESD protection, automotive, medical and consumer electronics. It can also be used in applications where high voltage protection is required, such as in solar inverters, motor drives and power supplies.

In conclusion, the GSOT03C-HT3-GS08 is a high frequency TVS diode, packaged in a small 2-pin SOT-23 case, and designed for high peak pulse power ratings. It works by reverse biasing, and when its breakdown voltage is exceeded, it will short out and clamp the voltage to its clamping voltage. As such, it is ideal for applications requiring high voltage protection, such as automotive, medical and consumer electronics.

The specific data is subject to PDF, and the above content is for reference