H11C2

Current - On State (It (RMS)) (Max):	300mA
Approvals:	UR
Supplier Device Package:	6-DIP
Package / Case:	6-DIP (0.300", 7.62mm)
Mounting Type:	Through Hole
Operating Temperature:	-55°C ~ 100°C
Current - DC Forward (If) (Max):	60mA
Voltage - Forward (Vf) (Typ):	1.2V
Turn On Time:	--
Current - Hold (Ih):	--
Series:	--
Current - LED Trigger (Ift) (Max):	20mA
Static dV/dt (Min):	500V/µs
Voltage - Off State:	200V
Voltage - Isolation:	5300Vrms
Number of Channels:	1
Zero Crossing Circuit:	No
Output Type:	SCR
Part Status:	Obsolete
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The H11C2 is a optoisolators type triac, SCR (silicon control rectifiers) that is output based control relay. It provides galvanic isolation between digital signals along with electromechanical relay in between. It is used in industrial applications to convert signals from a source to control a device or circuit.The core of the H11C2 is the optoisolator that is used to keep the HIGH side of the input circuit and the low side of the output circuit isolated, this way the two circuits don’t interact with each other. The optoisolator does this by using a small light source to not only detect the signal but to also carry the signal from one side to the other.The H11C2 optoisolator consists of two components – an LED (light emitting diode) and a photosensitive device such as a photo-transistor or a diac. The LED passes a light signal through an isolation barrier and the photons are then received by the photosensitive device on the other side. The photosensitive device is used to detect the presence of photons and converts them into a current or voltage.The LED, diac, and the output relay can be separately operated by using separate voltage levels or the same level for each component. The output relay is connected to the collector of the diac and is used to activate the desired device or circuit. When the diac is switched on or off, the output relay switches accordingly and activates the respective device or circuit.The H11C2 optoisolator is designed to operate at up to 60V AC/DC and has a maximum output current rating of 24V. The optoisolator can be operated with a frequency range of 0-100kHz for maximum efficiency. The LED has a maximum forward voltage rating of 15V, and the diac has a inverting and non-inverting trigger current that ranges from 0-50mA. The relay\'s contact ratings range from 15 to 30V.The H11C2 optoisolator is a versatile and reliable device designed for many different applications. Its use of a LED and diac as signal transducers, make it suitable for a wide range of devices or circuits that require isolation. It is often used in industrial applications such as for switching applications, motion control, process control, and many more. The H11C2 optoisolator is also commonly used in medical equipment due to its ability to provide reliable isolation along with its high resistance to shocks and vibrations. In conclusion, the H11C2 optoisolator is a great option if you are looking for a reliable and efficient way to switch and isolate a device or circuit. It is easy to install and requires minimal maintenance. Its use of an LED and diac provides an effective way to send and receive the signal with minimal interference and is ideal for industrial and medical applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description