H11C3300W

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are electronic devices which provide electrical insulation between two circuits. Within this category, H11C3300W belongs to triac and SCR (silicon controlled rectifier) output optoisolators. Originally used as a solid-state switch, optoisolators ensure electrical isolation between input and output by using a photodiode and LED to create a light-controlled interface, preventing electric sparks and shocks and fire hazards.

The H11C3300W optoisolator consists of a fixed triac and SCR output, with an isolated voltage option up to 7.5KVrms. It has a unique design which incorporates a zero-crossing circuit and input trigger circuit to produce an accurate output. The zero-crossing circuit prevents current spikes by automatically resetting the triac output, while the input trigger circuit sets the turning-on time of the output. It uses either AC or DC input that is routed directly to the LED. The output voltage of the triac is produced after the signal has been sent from the LED.

With the ability to handle up to 150Vrms and 350Vrms, H11C3300W optoisolator is one of the best solutions available for use in mains-powered appliances or other power control applications. It is designed to deliver a reliable electrical isolation with a wide range of input voltages. The switching element requires lower current than the traditional components, making it suitable for low-power devices. The compact package also makes it easier to install and maintain, as well as more efficient and economical.

The working principle of the H11C3300W optoisolator is relatively simple. Depending on the input signal, the LED either creates a strong current or turns off, producing a light-induced electric field between input and output. When the signal reaches a specified level, it triggers the triac, which in turn triggers the output triac. This triggers a series of events which result in the required output voltage being applied to the device.

In summary, the H11C3300W optoisolator is an effective and safe solution for power control applications. It provides electrical insulation between input and output by using a photodiode and LED. It has a wide range of electrical parameters, including a maximum input voltage up to 150Vrms/350Vrms. Moreover, it is compact in size and economical. The working principle is based on a light-induced electric field that triggers the output triac when the input signal reaches a specified level.

The specific data is subject to PDF, and the above content is for reference