H11C3300

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are electrical components used for isolating one part of an electrical circuit from another. One of the most common optoisolators is the H11C3300, which is a Triac, SCR Output optoisolator. It is a solid-state photovoltaic device that provides galvanic isolation between two circuits.

The H11C3300 is composed of two main parts: the optoisolator and the thyristor. The optoisolator is made up of a source of light, such as an LED (Light Emitting Diode), and a photodiode that converts the light into electrical signals. The photodiode is connected to the base of a transistor, and the base is connected to the gate of the thyristor. The thyristor is a four-layer semiconductor device with two PN (positive-negative) junctions. It is usually used as a switch in AC circuits.

The H11C3300 is used in circuits to isolate one part from the other in order to block electrical noise or prevent voltage overloads. It is used for AC switching, dimming, motor control, and interface circuits. For example, an interface circuit can be used to isolate two parts of a circuit, such as the input and output. The circuit can be used with logic signals or continuous wave signals.

The working principle of the H11C3300 is based on the interaction between the optoisolator and the thyristor. When the optoisolator receives light, it produces an electrical signal that is sent to the base of the transistor. This causes the transistor to turn on, and the current flows through the thyristor’s gate, triggering the thyristor to switch on. This in turn opens the circuit and allows current to flow through it.

When the light source is turned off, the optoisolator stops producing an electrical signal and the transistor turns off, causing the thyristor to switch off. This closes the circuit and prevents current from flowing through it. The H11C3300 can be used with a wide range of AC and DC loads, and can operate at temperatures ranging from -40°C to +125°C.

The H11C3300 is an effective and reliable optoisolator for isolating circuits and providing galvanic isolation. It has a wide range of applications, including AC switching, dimming, motor control and interface circuits. It is especially useful for protecting sensitive electronic components from harmful electrical noise and voltage surges. It is a cost effective solution and has a long service life.

The specific data is subject to PDF, and the above content is for reference