H11L2S(TB)-V

Data Rate:	1MHz
Supplier Device Package:	6-SMD
Package / Case:	6-SMD, Gull Wing
Mounting Type:	Surface Mount
Operating Temperature:	-55°C ~ 100°C
Voltage - Supply:	3 V ~ 16 V
Current - DC Forward (If) (Max):	60mA
Voltage - Forward (Vf) (Typ):	1.15V
Rise / Fall Time (Typ):	100ns, 100ns
Propagation Delay tpLH / tpHL (Max):	4µs, 4µs
Series:	--
Current - Output / Channel:	50mA
Output Type:	Open Collector
Input Type:	DC
Common Mode Transient Immunity (Min):	--
Voltage - Isolation:	5000Vrms
Inputs - Side 1/Side 2:	1/0
Number of Channels:	1
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Optoisolators are a type of device that use optical isolation to provide electrical isolation between two parts of a circuit. They are characterized by their ability to transform an electrical signal from one side of the circuit to the other without any physical connection. The H11L2S(TB)-V is a type of optoisolator in the Logic Output category. It is a device that isolates one logic signal from another. In this article, the application field and working principle of the H11L2S(TB)-V will be discussed.

Application Field

The H11L2S(TB)-V is used in many applications where the two sections of the circuit need to be electrically isolated from each other. One of the most common applications for the H11L2S(TB)-V is in digital signal processing. These devices are used in circuits to process digital signals. They are also used in the control systems of various equipment, such as industrial robots, cameras, and medical devices. The H11L2S(TB)-V can be used to isolate the logic signals from the sensor inputs and to ensure that the logic circuit is not impacted by the changing environmental conditions.The H11L2S(TB)-V is also used in communications systems. In these applications, the device is typically used to isolate the data transmission lines from the receiving circuit. It is used to prevent electrical noise from interfering with the transmission of data.

Working Principle

The H11L2S(TB)-V is essentially a logic gate that is isolated from the external circuit. It works by using an LED to send a logic signal across the isolation, while a photosensitive transistor receives the signal. The LED and the photosensitive transistor are isolated from each other by a barrier of electrically insulating material.The LED, when illuminated by a voltage, generates photons of light. When these photons strike the photosensitive transistor, it creates a current, which can be used to control the logic circuit. The output of the transistor is then used to enable or disable the switch or another logic gate.The logic signal is isolated from any external noise or interference by the barrier. This isolation allows the logic signal to remain unaffected by any noise on the external circuit.

Conclusion

The H11L2S(TB)-V is an optoisolator in the Logic Output category. It is used to electrically isolate two parts of a circuit and to protect logic signals from noise or interference. The device works by using an LED to send a logic signal across the isolation, while a photosensitive transistor receives the signal. The H11L2S(TB)-V is used in many applications, including digital signal processing, communications systems, and control systems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description