H11L2S1(TA)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are electronic components that employ light in order to provide galvanic isolation between two circuits. One of the most popular varieties of optoisolators are those with logic outputs, such as the H11L2S1(TA). This type of optoisolator is used in applications where a digital logic signal needs to be transmitted between two isolated circuits without any physical connection. It ensures that there is no electrical current or voltage transfer between the two circuits to maintain proper isolation.

The H11L2S1(TA) optoisolator mainly consists of an infrared LED, an integrated circuit, and a detector. The integrated circuit contains a photodetector and a logic IC with four outputs. It also contains a transistor and a photodiode as well as several resistors and capacitors for performing different operations. The LED emits an infrared beam towards the photodetector and the output of the optoisolator is determined by the intensity of the beam. When the beam is interrupted, it will switch the logic output to a "Logic low" state and when the beam is uninterrupted, it will switch the logic output to a "Logic high" state.

The main usage of a H11L2S1(TA) optoisolator is in the isolation of logic signals between two circuits. This is done by using the infrared LED to transmit the digital logic signal between two isolated circuits and the logic outputs of the optoisolator to compare the stated signal with a reference level or voltage. When the signal is the same as the reference voltage, the output of the H11L2S1(TA) optoisolator is set to “Logic High” and when the signal is different from the reference voltage, the optoisolator output is set to “Logic Low”.

The H11L2S1(TA) optoisolator is also used in applications where the isolation of analog signals is necessary. This type of optoisolator is capable of transmitting an analog voltage across two separated circuits without any physical connection. It works by using an integrated circuit, such as a comparator or operational amplifier, to compare the voltage on one side with that on the other side and convert the analog signal to a digital logic output. The output is then routed to the output of the optoisolator and switches on or off, depending on the analog signal.

In addition, a H11L2S1(TA) optoisolator can be used to isolate circuits from electrical noise that could interfere with the performance of the circuit. This type of optoisolator uses an integrated circuit that filters out the electrical noise from one side of the circuit and transmits a clean signal to the other side. The output from the optoisolator is then used to switch on or off the device, depending on the clean signal coming from the other side.

Finally, the H11L2S1(TA) optoisolator can also be used to interface two different circuits. This type of optoisolator contains an interface IC between the two sides and it provides a logic level conversion from one side to the other. This ensures that the two circuits are able to communicate and exchange data without any problems.

Overall, the H11L2S1(TA) optoisolator is a device that is designed to provide galvanic isolation between circuits. It is mainly used in applications where digital or analog signals need to be isolated from each other to prevent interference or where two circuits must be able to communicate with each other. The H11L2S1(TA) optoisolator is able to provide reliable and efficient isolation by using an infrared LED and logic outputs to compare its inputs and convert them into proper logic signals.

The specific data is subject to PDF, and the above content is for reference