Allicdata Part #: | HCNR200#300-ND |
Manufacturer Part#: |
HCNR200#300 |
Price: | $ 1.61 |
Product Category: | Isolators |
Manufacturer: | Broadcom Limited |
Short Description: | OPTOISO 5KV LINEAR PHVOLT 8SMD |
More Detail: | Optoisolator Photovoltaic, Linearized Output 5000V... |
DataSheet: | HCNR200#300 Datasheet/PDF |
Quantity: | 1000 |
1470 +: | $ 1.46632 |
Output Type: | Photovoltaic, Linearized |
Supplier Device Package: | 8-SMD |
Package / Case: | 8-SMD, Gull Wing |
Mounting Type: | Surface Mount |
Operating Temperature: | -55°C ~ 100°C |
Vce Saturation (Max): | -- |
Current - DC Forward (If) (Max): | 25mA |
Voltage - Forward (Vf) (Typ): | 1.6V |
Current - Output / Channel: | -- |
Voltage - Output (Max): | -- |
Series: | -- |
Input Type: | DC |
Rise / Fall Time (Typ): | -- |
Turn On / Turn Off Time (Typ): | -- |
Current Transfer Ratio (Max): | 0.75% @ 10mA |
Current Transfer Ratio (Min): | 0.25% @ 10mA |
Voltage - Isolation: | 5000Vrms |
Number of Channels: | 1 |
Part Status: | Active |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Optoisolators - Transistor, Photovoltaic Output are electrical devices that allow two circuits to communicate and protect one circuit from the other. The HCNR200#300 is a type of optoisolator which utilizes a photo-diode, a transistor, and a coupled element. It helps to isolate one circuit from another and reduce cross-talk and electromagnetic shield signal distortion.
An optoisolator is designed to provide electrical isolation between two circuits. The most common type of optoisolator is the photovoltaic output. This type consists of a light-emitting diode (LED) and a photodiode. The LED emits light, and the photodiode converts the light into an electrical current which passes through the optoisolator and into the other circuit. This helps to prevent noise, spikes, and transients from crossing between circuits.
Applying an HCNR200#300 optoisolator requires a few steps. First, the LED needs to be supplied with a voltage to light up. The voltage should be no higher than the maximum rating of the device which is typically 5.25V. Next, the photodiode needs to be connected in reverse-bias configuration. This helps to control the current to the optoisolator so that it does not exceed the maximum rating. After that, the signal from the photodiode is sent into the emitter of the transistor. The coupling element is used to adjust the collector current of the transistor to the desired value.
The HCNR200#300 optoisolator provides very high insulation and noise suppression levels due to its electrical design. One of the main applications of this optoisolator is in industrial automation systems as it helps to protect sensitive electronic devices from electrostatic discharges, high-voltage transients, and other disruptive currents. It is also used in high-precision digital control systems to ensure safety, reliability, and accuracy.
In addition, the HCNR200#300 optoisolator is also used in telecommunications systems, medical imaging systems, security systems, and consumer electronics. It is especially useful in communication links that work over short distances where electromagnetic signals can cause interference. The optoisolator helps to protect against this interference, allowing the communication link to remain secure and reliable.
The HCNR200#300 optoisolator is a reliable device with high immunity to noise, very low power consumption, and a long functional lifetime. With its wide range of applications, it is an excellent choice for many industrial and consumer electronic applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
HCNR200-500E | Broadcom Lim... | -- | 17750 | OPTOISO 5KV LINEAR PHVOLT... |
HCNR201-550E | Broadcom Lim... | -- | 1500 | OPTOISO 5KV LINEAR PHVOLT... |
HCNR200-550E | Broadcom Lim... | -- | 16 | OPTOISO 5KV LINEAR PHVOLT... |
HCNR200-050E | Broadcom Lim... | 1.25 $ | 1000 | OPTOISO 5KV LINEAR PHVOLT... |
HCNR200-350E | Broadcom Lim... | 1.26 $ | 1000 | OPTOISO 5KV LINEAR PHVOLT... |
HCNR200 | Broadcom Lim... | -- | 1000 | OPTOISO 5KV LINEAR PHVOLT... |
HCNR200#500 | Broadcom Lim... | 1.61 $ | 1000 | OPTOISO 5KV LINEAR PHVOLT... |
HCNR200#050 | Broadcom Lim... | 1.61 $ | 1000 | OPTOISO 5KV LINEAR PHVOLT... |
HCNR200#300 | Broadcom Lim... | 1.61 $ | 1000 | OPTOISO 5KV LINEAR PHVOLT... |
HCNR200#550 | Broadcom Lim... | 1.63 $ | 1000 | OPTOISO 5KV LINEAR PHVOLT... |
HCNR200#350 | Broadcom Lim... | 1.63 $ | 1000 | OPTOISO 5KV LINEAR PHVOLT... |
HCNR201#300 | Broadcom Lim... | 2.14 $ | 1000 | OPTOISO 5KV LINEAR PHVOLT... |
HCNR201#050 | Broadcom Lim... | 2.14 $ | 1000 | OPTOISO 5KV LINEAR PHVOLT... |
HCNR201#500 | Broadcom Lim... | 2.14 $ | 1000 | OPTOISO 5KV LINEAR PHVOLT... |
HCNR201#550 | Broadcom Lim... | 2.16 $ | 1000 | OPTOISO 5KV LINEAR PHVOLT... |
HCNR201#350 | Broadcom Lim... | 2.16 $ | 1000 | OPTOISO 5KV LINEAR PHVOLT... |
HCNR201-500E | Broadcom Lim... | -- | 22500 | OPTOISO 5KV LINEAR PHVOLT... |
HCNR200-000E | Broadcom Lim... | -- | 23977 | OPTOISO 5KV LINEAR PHVOLT... |
HCNR200-300E | Broadcom Lim... | -- | 5920 | OPTOISO 5KV LINEAR PHVOLT... |
HCNR201-000E | Broadcom Lim... | -- | 12925 | OPTOISO 5KV LINEAR PHVOLT... |
HCNR201-300E | Broadcom Lim... | -- | 6527 | OPTOISO 5KV LINEAR PHVOLT... |
HCNR201-050E | Broadcom Lim... | -- | 1234 | OPTOISO 5KV LINEAR PHVOLT... |
HCNR201-350E | Broadcom Lim... | 3.8 $ | 319 | OPTOISO 5KV LINEAR PHVOLT... |
HCNR201 | Broadcom Lim... | -- | 873 | OPTOISO 5KV LINEAR PHVOLT... |
OPTOISO 5.3KV TRANS W/BASE 6DIPOptoisola...
OPTOISOLTR 5KV TRANSISTOR 4-SMDOptoisola...
OPTOISOLTR 5KV DARLINGTON 4-SMDOptoisola...
OPTOISOLATOR 5KV DARLINGTON 4SMDOptoisol...
OPTOISO 4.17KV TRANS 6DIPOptoisolator Tr...
OPTOISO 5.3KV TRANSISTOR 4SMDOptoisolato...