HCNR200-550E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are devices used in electrical systems and circuits to provide isolation between separate data or power sides of the device. The HCNR200-550E is a type of optoisolator, more specifically, a Transistor, Photovoltaic Output optoisolator. It is typically used in various applications for isolating data and signals. It uses an LED coupled to a phototransistor and its working principle is based on the transfer of light between these two components.

The HCNR200-550E optoisolator has an operating voltage rating of 8V, a peak operating current of 100mA, and a peak repetitive reverse voltage of 5V. Its direct input current is between 25uA and 7mA, and the direct output current when ON is between 10mA and 50mA, depending on the ambient light intensity. It can also withstand a \'pulse strength\' of 10,000V, 10KHz.

The HCNR200-550E optoisolator is used in several applications. First, it can be used to transfer digital signals or data between two different circuits. By connecting the LED to one circuit and the phototransistor to another circuit, the pulse or digital signal passing through the LED may be transferred to the receiving side of the circuit with no direct connection between the two circuits whatsoever. This allows circuits to communicate while still maintaining the electrical isolation.

The optoisolator can also be used in the protection of sensitive electronic devices, like computers and other peripherals. By placing the optoisolator between the wires of the peripheral device, any electrical surge or interference can be blocked, thereby protecting the sensitive device from unwanted voltage or current.

The HCNR200-550E optoisolator is also useful in measuring temperature. The temperature of the environment is measured by the LED, which gives out increasing amounts of light with increases in temperature. The phototransistor then receives this light and provides a proportional output current, thus allowing a circuit to measure the temperature of the environment.

The HCNR200-550E optoisolator is also quite useful in providing electrical isolation between two circuits with widely differing ground potentials. By using the HCNR200-550E optoisolator, the circuit current will be kept completely isolated from each other, thus preventing any damage to both circuits.

In summary, the HCNR200-550E optoisolator is a useful device used in several applications. It is typically used to transfer digital data between two different circuits, protecting them from interference and providing electrical isolation. It can also be used to measure temperature and to provide isolation between two circuits with widely different ground potentials.

The specific data is subject to PDF, and the above content is for reference