HCPL-7860

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

HCPL-7860 is a solid-state optoisolator designed for special applications. It is designed to provide minimum component count and low cost connection between a digital signal controller and a digital logic signal line. It can be used to provide isolation of the digital logic signal. It has a high speed switching capability between the logic signal line and the controller.

It can be used in a variety of applications including machine control, process control, and data acquisition. It is also useful for measuring temperatures and pressures. It provides an electrical interface between the controller and the signal line and it is suitable for both high speed and low speed operations.

The HCPL-7860 uses the phototransistor optoisolator principle. This employs a phototransistor opto-coupler IC. A light emitting diode (LED) is used to transmit the electrical signal from the controller to the phototransistor through the use of a photodiode. The photodiode will convert the optical signal emitted by the LED into an electrical signal that is then amplified. The amplified electrical signal is transmitted to the controller.

The HCPL-7860 uses two input ports and two output ports. The input ports are the logic signal port and a controller port. The output ports are the logic signal port and a controller port. The controller port uses an optocoupler IC to drive the logic signal line. The optoisolator can be set to operate in either low speed or high speed mode. In low speed mode, the optoisolator is used to drive a small signal, such as a relay or a voltage level. In high speed mode, it is used to drive standard logic gates.

The HCPL-7860 also provides a common impedance between the signal line and the controller. This reduces interference between the two systems. It also provides a signal ground for both the logic signal line and the controller. The signal ground reduces the possibility of noise and errors due to ground bounce.

The HCPL-7860 is a versatile opto-isolator that provides an effective means of managing communication lines between a digital signal controller and a digital logic signal line. Its low cost and high speed switching make it suitable for a variety of applications. It is also useful for measuring temperatures and pressures. With its common impedance and signal ground, it reduces the possibility of noise and errors.

The specific data is subject to PDF, and the above content is for reference