HEF4066BP,652

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The HEF4066BP,652 is an integrated circuit from the family of analog switches, multiplexers, demultiplexers. This chip is designed and built for a wide range of general- and special-purpose applications, providing fast switching between two control ares without crossover distortion.

The HEF4066BP,652 consists of four independent, monolithic CMOS gates. Each gate includes a set of N- and P-type switch transistors (Field-Effect Transistors, or FETs) that can be used with a single supply voltage, dual supply voltage, or three different supply voltage configurations. The internal logic structure is compatible with either 5V or 3V logic, in addition to that, each gate features an open-collector “contactor” that can be used to drive external power MOSFETs. By providing logic level compatibility and control of external power MOSFETs, the device can be used for fast switching of multiple levels of power, and hence is employed in many high-power applications such as automotive, industrial and telecom related industries.

The HEF4066BP,652 operates on a wide range of voltages and frequencies, being able to handle frequencies from a few Hertz up to 100MHz. Each of the four upstream switches is designed to accept switch control signals from digital logic and provide very low ground-bounce and high-frequency transient performance.

The basic working principle of the device is that when a logic HIGH voltage is applied to the control pin, the associated FET gate turns ON, and when a logic LOW voltage is applied, the switch is OFF. When the switch is turned ON, current is allowed to flow through the gate and the associated MOSFET, thereby connecting one control lead to the other, forming a closed contact. The resistance of the switch, when ON, is typically very low and hence there is very little power loss in the connection, even at high frequencies.

The HEF4066BP,652 are ideal for a wide range of applications like multiplexers and demultiplexers, data acquisition systems, power switching circuits, in-vehicle applications, computer and telecom systems, etc. They can be used to switch between two logic levels, from a logic level to a low power device such as a relay or an LED, or from a low power device to a logic level. The same transistors can also be used for switching mixed DC and AC signals, allowing for fast switching with low power consumption.

The HEF4066BP,652 offers the ability to switch multiple sets of FETs with a single logic signal. By using only a single logic signal to switch multiple sets of FETs, the device is able to increase power-efficiency while preserving the control axis integrity. Additionally, the HEF4066BP,652 can be used to provide isolation of two control axes, as it is not affected by the load attached to the drain/source.

The HEF4066BP,652 is a versatile analog switch, multiplexer, and demultiplexer, with the ability to provide rapid switching between the two control areas and low power consumption. It offers both digital logic compatibility and control of output MOSFETs and is used in a variety of applications including automotive, industrial, and telecom-related fields.

The specific data is subject to PDF, and the above content is for reference