Allicdata Part #: | HI4P0546-5Z-ND |
Manufacturer Part#: |
HI4P0546-5Z |
Price: | $ 16.47 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | Intersil |
Short Description: | IC MULTIPLEXER 16X1 28PLCC |
More Detail: | 1 Circuit IC Switch 16:1 1.8 kOhm 28-PLCC (11.51x1... |
DataSheet: | HI4P0546-5Z Datasheet/PDF |
Quantity: | 1000 |
148 +: | $ 14.96730 |
Series: | -- |
Packaging: | Tube |
Part Status: | Active |
Switch Circuit: | -- |
Multiplexer/Demultiplexer Circuit: | 16:1 |
Number of Circuits: | 1 |
On-State Resistance (Max): | 1.8 kOhm |
Channel-to-Channel Matching (ΔRon): | 126 Ohm |
Voltage - Supply, Single (V+): | -- |
Voltage - Supply, Dual (V±): | ±15V |
Switch Time (Ton, Toff) (Max): | 300ns, 300ns (Typ) |
-3db Bandwidth: | -- |
Charge Injection: | -- |
Channel Capacitance (CS(off), CD(off)): | 10pF, 52pF |
Current - Leakage (IS(off)) (Max): | 30pA (Typ) |
Crosstalk: | -- |
Operating Temperature: | 0°C ~ 75°C (TA) |
Package / Case: | 28-LCC (J-Lead) |
Supplier Device Package: | 28-PLCC (11.51x11.51) |
Base Part Number: | HI-546 |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The HI4P0546-5Z is an interface device used in analog switching, multiplexing, and demultiplexing. It is a four-channel device with a signal/power ratio of 5 to 6. It is a part of the HI3Pxx series of high-speed analog switch devices from Hitex. The device is ideal for use in wireless communication systems and other high-speed automotive systems.
The device features low power consumption, low noise, and excellent power supply rejection, making it suitable for automotive applications. It has a wide ESD tolerance and can operate over an extended temperature range. It is also capable of protecting the connection against electrical shock.
The operation of the HI4P0546-5Z is based on the switch switching principle. It has a four-channel input and output, connected in either the push-pull or open-drain configuration. The output is controlled by an external bias voltage applied to the input pin. The switch is then enabled or disabled depending on the value of the input. When the input is logic 0, the switch is disabled and the output pin is kept low. When the input is logic 1, the/switch is enabled and the output pin is set to high.
The switch is designed to operate over a wide range of supply input voltage. It can handle both AC and DC inputs and operate from a single battery. It also features a low-leakage current, which helps conserve battery power. The switching speed of the device is dependent on the input voltage but is typically in the range of 2 nanoseconds to 200 microseconds. The device also has protection against ESD and over-voltage events.
The HI4P0546-5Z supports two multiplexing modes: the bidirectional mode and the single-ended mode. In the bidirectional mode, the active switch is driven by the input voltage, while in the single-ended mode, the active switch is driven by the opposite side of the input. This gives the device greater flexibility in applications where multiplexing is required. The device also has a low power-on/off ratio, making it suitable for use in battery-powered systems.
The HI4P0546-5Z is an excellent interface device for analog switching, multiplexing, and demultiplexing applications. It has a wide input voltage range, low current consumption, and excellent protection against electrical shock. The device is an ideal choice for applications such as automotive and wireless communication systems.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
HI4P0201-5 | Intersil | 0.0 $ | 1000 | IC SWITCH QUAD SPST 20PLC... |
HI4P0201-5Z | Intersil | 0.0 $ | 1000 | IC SWITCH QUAD SPST 20PLC... |
HI4P0506-5 | Intersil | -- | 1000 | IC MULTIPLEXER 16X1 28PLC... |
HI4P0509-5 | Intersil | -- | 1000 | IC MULTIPLEXER DUAL 4X1 2... |
HI4P0509-5Z | Intersil | 0.0 $ | 1000 | IC MULTIPLEXER DUAL 4X1 2... |
HI4P0546-5 | Intersil | 0.0 $ | 1000 | IC MULTIPLEXER 16X1 28PLC... |
HI4P0547-5 | Intersil | 0.0 $ | 1000 | IC MULTIPLEXER DUAL 8X1 2... |
HI4P0547-5Z | Intersil | 0.0 $ | 1000 | IC MULTIPLEXER DUAL 8X1 2... |
HI4P0548-5 | Intersil | 0.0 $ | 1000 | IC MULTIPLEXER 8X1 20PLCC... |
HI4P0549-5 | Intersil | 0.0 $ | 1000 | IC MULTIPLEXER DUAL 4X1 2... |
HI4P0549-5Z | Intersil | 0.0 $ | 1000 | IC MULTIPLEXER DUAL 4X1 2... |
HI4P0509-5Z96 | Intersil | 0.0 $ | 1000 | IC MULTIPLEXER DUAL 4X1 2... |
HI4P0506-5Z | Intersil | 13.52 $ | 1000 | IC MULTIPLEXER 16X1 28PLC... |
HI4P0546-5Z | Intersil | 16.47 $ | 1000 | IC MULTIPLEXER 16X1 28PLC... |
IC SWITCH SPST 8MSOP1 Circuit IC Switch ...
IC ANALOG SWITCHCircuit IC Switch
IC SWITCH SPDT 8MSOP1 Circuit IC Switch ...
IC SWITCH QUAD SPST 16SOIC4 Circuit IC S...
IC SWITCH QUAD SPDT 20SOIC1 Circuit IC S...
IC SWITCH QUAD SPST 16SOIC4 Circuit IC S...