HMC482ST89ETR RF/IF and RFID

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF amplifiers are used to pass a range of frequencies, often within the radio frequency (RF) band. The type of amplifier required will depend on the frequency range and power levels of the signal being amplified. The HMC482ST89ETR is a perfect example of an RF amplifier designed to work within the 1 to 9 GHz frequency range. It is an integrated circuit (IC) from Avago Technologies that is capable of providing 20 dB of gain and 35dBm of output power for a given operating frequency.

The HMC482ST89ETR application field covers a range of applications in which the circuit can be used. Some examples include: cellular base station transmitters, point-to-point radio systems, satellite terminals, and short-haul radio systems. It is also an ideal choice for applications which need to amplify very low power signals up to a predetermined level, such as in highly sensitive receivers. These applications all benefit greatly from using this highly reliable and sensitive RF amplifier from Avago.

The working principle of the HMC482ST89ETR is quite straightforward. In essence, the RF signal is passed through two stages of amplifiers. The first stage consists of an input level detector and two stages of power amplifier transistors. This provides gain and power amplification. The second stage is made up of two stages of low noise amplifier transistors, which provide up to 20dB of additional amplification to the signal.

Once the signal is amplified, it is then sent to the output port of the circuit. The output is filtered to remove any noise or other out-of-band signals that may be present. The output can then be used for further amplification, or it can be connected directly to an antenna or other end-device for signal transmission or reception.

The HMC482ST89ETR offers a number of key advantages over other comparable circuits. These include enhanced linearity and improved linearity over temperature due to the two-stage design. This improved linearity and noise performance ensures that the amplifier maintains a very flat frequency response over the 1 to 9 GHz range. Additionally, the amplifier has extremely low current consumption, making it ideal for applications which require a low power consumption.

The HMC482ST89ETR is a reliable and cost-effective RF amplifier suitable for a wide range of applications from point-to-point radio systems to short-haul radio systems. It offers high gain and an excellent noise performance while requiring low current consumption. It is an ideal choice for applications seeking a reliable, cost-effective solution for amplifying low power signals within the 1 to 9 GHz frequency range.

The specific data is subject to PDF, and the above content is for reference