HMC900LP5E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

HF filters exist today in a wide range of applications in various design and engineering disciplines. Filter designs can be as simple as a single inductor-capacitor combination to as complex as specialized high-frequency electronic circuits. The HMC900LP5E is a standard open-loop wideband filter with low power consumption. It is used for applications such as frequency synthesis, signal modulation/demodulation, and for stabilizing interference caused by frequency sensitive digital features, including PLLs, oscillators and digital logic.

The HMC900LP5E is built on a 0.5mm CMOS process, allowing for low-power operation with higher operating frequencies than traditional integrated filters. Its wide bandpass filter ranges from 100 to 750MHz with a 20MHz window passband. It also has an adjustable center frequency of 500 MHz and an adjustable 3dB bandwidth of 40 MHz. The HMC900LP5E is designed to optimize the system\'s high performance, power/area efficiency, and overall cost.

The HMC900LP5E operates with a high selectivity of up to 55dB, making it well suited for radio applications that require very low BER. Its excellent noise performance and low-loss design make it a great choice for use in receiving filters, RF signal detectors, and other RF/microwave filtration circuits. The filter also provides superior image rejection over traditional filters with a 50 to 70dB ISO.

The working principle of the HMC900LP5E open-loop filter is based on inductor and capacitor elements that are used to construct an electric transmission line. The transmission line behaves as a bandstop filter, meaning it filters out frequencies that are within a certain range. The design of the filter is such that there is a transition area within the filter that allows frequencies below the lower cutoff frequency to pass, while attenuating frequencies above the upper cutoff frequency. Additionally, the HMC900LP5E features a low-loss filter network for improved signal integrity and power handling.

The HMC900LP5E filter can also be tuned to reduce or create selectivity within a particular frequency range. This is made possible by connecting additional leakage inductors to the core filter. Leakage inductors effectively reduce the upper cutoff frequency, enhance the filter\'s roll-off rate, and reduce its passband ripple. The signal passing through the filter is then attenuated in the stopband and the sharpness of the roll-off is then enhanced. The leakage inductors also allow the filter to provide additional flexibility in design.

The HMC900LP5E is a versatile and reliable filter that can be used for a wide range of applications. Its wide passband and high selectivity make it perfect for radio frequency filters in both commercial and military applications. It is also a suitable choice for applications such as frequency synthesis, signal modulation/demodulation, PLLs, oscillators, and digital logic. The filter\'s low power consumption and its high-quality design make it a top choice for many RF filter designers.

The specific data is subject to PDF, and the above content is for reference