HVMLS682M020EK0C

Series:	MLS
Packaging:	Bulk
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Capacitance:	6800µF
Tolerance:	±20%
Voltage - Rated:	20V
ESR (Equivalent Series Resistance):	84 mOhm @ 120Hz
Lifetime @ Temp.:	10000 Hrs @ 85°C
Operating Temperature:	-55°C ~ 125°C
Polarization:	Polar
Ratings:	--
Applications:	General Purpose
Ripple Current @ Low Frequency:	11A @ 120Hz
Ripple Current @ High Frequency:	12.2A @ 20kHz
Lead Spacing:	1.000" (25.40mm)
Size / Dimension:	1.500" L x 1.750" W (38.10mm x 44.45mm)
Height - Seated (Max):	0.500" (12.70mm)
Surface Mount Land Size:	--
Mounting Type:	Through Hole
Package / Case:	FlatPack

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to HVMLS682M020EK0C Aluminum Electrolytic Capacitors

Aluminum Electrolytic capacitors or Electrolytic capacitors, are an important type of polarized capacitor used in many electronic applications. Polarized capacitors require a positive and negative electrode separated by a dielectric material. As different electrodes have different electrochemical and electrical properties, these capacitors have different dielectrics in order to create a specific electrical characteristic.The HVMLS682M020EK0C paired with its metalized film dielectric material is one type of aluminum electrolytic capacitor which can achieve greater capacitance and voltage ratings with smaller physical sizes than can be achieved by other types of capacitors. The device has a case size of 8mm x 11.5mm, a height of 13.6mm and a maximum rated voltage of 200V. The working principle behind Aluminum electrolytic Capacitors is related to the principle of dielectric. It is based on the electric double layer of energy stored between two conductors, coupled with electrolytic solution. The energy is stored as electric field and can be released quickly with little loss. This is different from traditional ceramic or plastic capacitors, which store energy based on electrostatic principles and cannot release the energy as quickly as electrolytic capacitors.

Application Field

The HVMLS682M020EK0C Aluminum Electrolytic Capacitor is primarily used in applications that require higher voltage capabilities in relatively small devices. They are commonly used in audio equipment, power converters, and power supplies. The HVMLS682M020EK0C is capable of withstanding extended voltage, and is thus ideal for applications which require circuits to be maintained in a certain state and unable to be altered for longer periods of time.These capacitors are also used in automotive applications where high voltage and small physical size are often a requirement. While similar capacitors have been developed with an extended voltage range, the HVMLS682M020EK0C has the capability of supporting high voltage applications and is not affected by corrosion or physical damage. Their wide temperature range makes them suitable for use in extreme environmental conditions and in medical applications.

Construction of HVMLS682M020EK0C

The HVMLS682M020EK0C Aluminum Electrolytic Capacitor consists of two conductive electrodes, which are separated by a metalized film dielectric. The electrodes are typically made of aluminum, which acts as the positive electrode. The metalized film acts as the dielectric and the second layer is made of an absorbent material or catalyst. The dielectric dielectric is coated with a mixture of powder and electrolyte which will react against the electrodes when a voltage is applied to the capacitor. This reaction is what causes the capacitance of the device and is what allows stored energy to be released quickly. The lead wires used to connect the electrodes to the circuit are connected to the electrolytic solution, allowing the flow of current as necessary. An additional element on the terminal of the capacitor is the safety vent which helps to prevent physical damage due to changes in pressure or temperature.

Conclusion

The HVMLS682M020EK0C Aluminum Electrolytic Capacitor is an ideal capacitor for applications requiring output voltages of 200V or less. Its metalized film dielectric makes it capable of withstanding higher voltages and gives it a wide temperature range, making it highly suitable for use in automotive and medical applications. The capacitor’s construction, with two conductive electrodes separated by a metalized film dielectric, allows it to store and release energy quickly, while the safety vents help protect against damage due to sudden changes in pressure or temperature.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description