IDH02G120C5XKSA1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are a type of semiconductor device. They allow the flow of current in one direction, while blocking it in the opposite direction. A single diode, such as the IDH02G120C5XKSA1, can be used to provide rectification of an alternating current (AC) signal. A rectifier is a device that converts an AC signal into unidirectional current.

The IDH02G120C5XKSA1 is a single diode module. It is a three-terminal device, with one anode and two cathodes. The anode is the positive terminal, and the two cathodes are the negative terminals. The device is constructed using an NPN bipolar transistor, in which the base and emitter form the two cathodes and the collector forms the anode. This allows the device to both carry and block current.

The IDH02G120C5XKSA1 is primarily used for power switching applications, such as grounding any AC signal fed through it. The device is connected between the AC source and ground in order to limit the maximum DC voltage on the load downstream. It also acts as a current limiter, protecting the load from unusually high currents, especially during short-circuit conditions. The device can also be used in overvoltage protection circuits since it has a maximum rated reverse voltage of 600 volts.

The IDH02G120C5XKSA1 operates on the principle of rectification. When an AC voltage (VAC) is applied across the device, the anode will become positive relative to the two cathodes, allowing current to flow through the device in the forward direction. When the polarity of the signal reverses, the anode will become negative relative to the two cathodes, which causes the device to block any current flow in the reverse direction.

The typical application of the IDH02G120C5XKSA1 is to limit the DC voltage on loads by providing a clamping action. The device is able to do this because the current is limited in two directions. When the voltage across the device is greater than the breakdown voltage, the device will block the excess current. This prevents higher voltage from affecting the load.

The IDH02G120C5XKSA1 is a versatile devicethat can be used for a variety of applications. Its main purpose is to provide rectification for an AC signal, providing unidirectional current to a load. The device is also able to protect the load from unusually high voltage and current, as well as providing overvoltage protection. This makes the IDH02G120C5XKSA1 an essential component for any power system that requires protection from high voltage or current.

The specific data is subject to PDF, and the above content is for reference